![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: hdmiminiflat
The world lighter and thinner mini flat to Hdmi cable, lenght 50 cm. weigh only few grams...
23.90€
Brez DDV:19.59€
Blagovna znamka: DJI
Model: DJI-IN2-HR
Overview
Used to mount the DJI Focus Handwheel to the remote controller, enabling a single operator to adjust Zenmuse X5S focus more easily.
In the Box
Inspire 2 - DJI Focus Handwheel Remote Controller Stand ×1
Compatibility
Inspire 2DJI Focus HandwheelDJI Focus Handwheel - Inspire 2 RC CA..
59.90€
Brez DDV:49.10€
Model: 4216cw2
Specs
Stator Size: 42x16 mm KV: 310 rpm/V Weight: 195 g
In The Box
4216 Motor CW x1..
45.90€
Brez DDV:37.62€
Model: AA-PC90
Extra Soft Power cable for Alexa Mini - lenght 50 cm, specially made for gimbals.
Original connector is XT60, but we can install some other connector too...
133.90€
Brez DDV:109.75€
Model: FF-MP-L
This cable allows users to access their camera"s LANC commands. This allows users to start and stop camera recording as well as other LANC commands from up to 600+ feet away using the MōVI Controller. The cable features custom ultra thin and flexible cable.
Features
Custom high flex, lightweigh..
25.90€
Brez DDV:21.23€
Blagovna znamka: Mauch Electronic
Model: MAU2-040
This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL - Series.
REM: This cable is standard deliverred together with any BEC or Sensor Hub X2-V2 ..
7.90€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-042
This cable is for the PL 2-6S series BEC"s to connect to Pixhawk 2.1 or any flight controller with Molex / Clik-Mate / 2.0mm / 6p connector.
L = 150mm ..
7.90€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-041
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with DF13-6p connector.
For example:
Pixhawk 1, APM... etc.
L = 150mm ..
5.90€
Brez DDV:4.84€
Blagovna znamka: Mauch Electronic
Model: MAU2-004
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
64.90€
Brez DDV:53.20€
Blagovna znamka: Mauch Electronic
Model: MAU2-016
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
67.90€
Brez DDV:55.66€
Blagovna znamka: Mauch Electronic
Model: MAU2-002
100A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
54.90€
Brez DDV:45.00€
Model: wkmpmu
Spare Wookong PMU - power unit for wookong...
115.90€
Brez DDV:95.00€