![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: DJI
Model: a3up
The A3 can be upgraded to A3 Pro by using two A3 Upgrade Kits. The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure du..
561.90€
Brez DDV:460.57€
Model: insp-car-ch
The Car Charger for Inspire 1 is used to charge the Intelligent Flight Battery or remote controller through a car"s cigarette lighter port. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low or cigarette li..
109.90€
Brez DDV:90.08€
Blagovna znamka: Yuneec
Model: LRKITYUN
Product Description
This kit is designed for all Yuneec quadcopters using the ST-10 and ST-10+ controller for ranges of 4,000 ft. Remember these antennas need to have the tips pointed at the quadcopter. What is included in this kit:
1x u.fl to rp-sma female cable (rg-178 coax) 9cm long (for 2.4ghz r..
84.90€
Brez DDV:69.59€
Model: LRKITI1P3
Product Description
this kit includes
1. redesigned antenna array with LHCP + RHCP helix 10.5dBi gain, 60 degrees beamwidth (measured at half power). 2. 3d printed plastic mount3. 2 mmcx to rp-sma female pigtail cables to modify the radio control.
Distances of 10km with exceptionally good reception ..
84.90€
Brez DDV:69.59€
Model: LRKITP3S
Product Description
This is the new and improved kit for PH3 Standard. The 5.8ghz has been increased to 14.5dBi so it’s quite directional with 38 degrees beam width the 2 2.4ghz helix antennas for rc control are 10.5dBi and have a 55 degrees beam width It comes with 3 u.fl cables to rp-sma female an..
48.90€
Brez DDV:40.08€
Model: vortexplastic
Vortex Crash Kit #1: Standard Plastic Parts
These are parts most likely to break in a serious crash. Included are all parts which mount the motors to the carbon fiber arms, the plastic pivot points, foldable arm clips, and all other plastic parts. No carbon fiber parts are included in this crash kit..
14.90€
Brez DDV:12.21€
Model: vortexmobius
Vortex Mobius Incliner Kit
An updated anti-jello plate for the Vortex, which inclines the Mobius by 20 degrees, for optimal camera angle when flying at speed.
Includes:
1x Baseplate (Carbon Fiber)
1x Top Plate (Carbon Fiber)
2x 20 degree Side Plate (Carbon Fiber)
4x M3 Aluminium Nut
4x M3 Aluminiu..
28.90€
Brez DDV:23.69€
Model: vortexkit
Vortex Crash Kit #2: Carbon Fiber Parts
In most serious crashes, the parts in Crash Kit #1 will suffice to get the Vortex in the air again. For the real serious stuff, parts from Crash Kit #2 may be required.
Contains the following parts:
1x Top Frame, Carbon Fiber1x GoPro anti-vibe plate, short, ..
54.90€
Brez DDV:45.00€
Model: inspiremotormo
DJI 1345S Quick Release Propellers feature a new locking mechanism that prevents your propellers from becoming loose during flight. These propellers are compatible with all Inspire 1 units and are perfectly suited to the motor deceleration functions native to your Inspire 1...
4.90€
Brez DDV:4.02€
Blagovna znamka: Connex
Model: AMN-ACC-003
Antenna Clamper – Connex air unit dedicated antenna mounting clampers (2 units)..
14.90€
Brez DDV:12.21€
Model: matrbat
Function: Provides installation space for an extra battery. Feature: The Matrice 100 allows independent power supply modules that can fly with it. Multiple modules co-operate together to ensure a longer flight time. Adjustable mounting holes on the module enable you to adjust the position of the bat..
159.90€
Brez DDV:131.07€
Model: LRinst
This item includes 3 hours of service for installation and testing of RF outputs as well as radiation pattern of the antennas after install is perfomed. All parts will be mounted on the 3d printed mount...
108.90€
Brez DDV:89.26€