![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: ARGUS-STACK-MINI-F7PRO-55A
The Argus mini stack (20*20mm) from AxisFlying has been specially designed for small FPV drones, further reducing weight while providing stable and excellent control.
It has an Argus Mini F722 pro flight controller supporting up to 4 motor outputs and having a 16Mb blackbox and an MPU6000 gyro.
The ..
152.90€
Ex Tax:125.33€
Model: AR005691
Recharge your drone"s battery quickly on your DJI Power charging station using this SDC fast charging cable.
It will allow you to charge the battery of a Mavic 3 in only around 32 minutes or 30 minutes for that of an Air 3.
Two options are offered to you, a cable intended for the batteries of the DJ..
20.90€
Ex Tax:17.13€
Model: AXIS-C227-1960
Axisflying"s C227 motor is the ultimate cinematic tool.
Made of high quality materials, the 1960KV motor can cope with higher temperatures while promising stability and flight quality. This quality composition also increases its crash resistance by 25%.
The C227 has an M5 nut shaft and is compatible..
21.90€
Ex Tax:17.95€
Model: VCI-DOVE-PNP
The DOVE flying wing from Vulcan Innovation features a small fuselage and is designed to increase battery life.
It is compatible with the DJI O3 air unit and analog systems.
Its structure and the carbon fiber that composes it give it better stability and life compared to ordinary wood.
The two-color..
199.90€
Ex Tax:163.85€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.90€
Ex Tax:4.02€
Model: VALKYRIE-MINI-TANTENNA-TPUBYDFR
Support for mounting an immortal T antenna on the rear of the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~0.8g
Included
1x TPU mount
Voir plus..
2.90€
Ex Tax:2.38€
Model: VALKYRIE-MINI-O3-TPUBYDFR
Support for mounting an O3 antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
3.90€
Ex Tax:3.20€
Model: VALKYRIE-MINI-GOPRO-TPUBYDFR
Support to install a GoPro on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~8.3g (with screw and nut)
Included
1x TPU mount
1x Screw
1x Nut
Voir plus..
5.90€
Ex Tax:4.84€
Model: VALKYRIE-MINI-O3-DJI-TPUBYDFR
Support for mounting an O3 camera or DJI FPV camera on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~2g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.90€
Ex Tax:3.20€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
8.90€
Ex Tax:7.30€
Model: VALKYRIE-MINI-WHOOPKIT-TPUBYDFR
Full TPU kit for the Whoopkit of the ParallaxFPV Valkyrie Mini 3.5".
Note: These TPU parts are only intended for the Whoopkit part of the Valkyrie Mini.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5" frame whoopkit
Weight : ~29.4g
Included
1x TPU set
Voir pl..
20.90€
Ex Tax:17.13€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
103.90€
Ex Tax:85.16€