Search Criteria
Products meeting the search criteria
Model: DC1550/160C-6S
Dogcom 6S 1550mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
47.90€
Ex Tax:39.26€
Model: HQ3X3X3G-AVATA 2
New HQProp 3x3x3 propellers for the DJI Avata 2.
Specifications
Propeller Diameter: 3inch
Pitch : 3
Blades : 3
Material : Poly Carbonate
Weight : 1.65g
Hub Diameter : 11.6mm
Hub Thickness : 6.6mm
Shaft :2.3/2/2.3mm
Adaptor Rings : NO
Included
2x CW..
4.90€
Ex Tax:4.02€
Model: HP0110.0030-EU
The ToolkitRC Q6AC charger has dual AC/DC inputs and four XT30/XT60 outputs.
In addition to charging your batteries, you can also use the USB-A and USB-C ports to power your tablet or laptop.
The Q6AC has a built-in fan that promises optimal heat dissipation. Its internal memory allows you to save u..
261.90€
Ex Tax:214.67€
Model: T014716
The Commando 8 Iflight radio with fully integrated ExpressLRS is now available in Lite version.
Also equipped with a TCXO crystal oscillator, the Commando 8 Lite is much lighter than the original (~280g).
The SMD antenna is integrated and the gimbal is removable, which makes portability and transpor..
88.90€
Ex Tax:72.87€
Model: THUNDER-2207-2100KV-UNIT
You are looking for race performance, speed and agility?
Xnova"s Black Thunder motors are precisely what you wanted, with their new design, the 2207 motors in 2100KV feature high torque for ultimate efficiency.
Specifications
KV : 2100
No-Load Current (@10V) : 1.4A
Weight : ~31.7g (with wires)..
32.90€
Ex Tax:26.97€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.90€
Ex Tax:4.02€
Model: RD15669
The Mach R5 provides racing pilots with a high-quality FPV drone while allowing DIY customization.
The carbon plates and plastic components provide an improved internal structure layout, which simplifies maintenance while reducing the overall weight of the drone and thus providing better stability.
..
390.90€
Ex Tax:320.41€
Model: DC1050/160C-6S
Dogcom 6S 1050mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
37.90€
Ex Tax:31.07€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
8.90€
Ex Tax:7.30€
Model: VALKYRIE-MINI-WHOOPKIT-TPUBYDFR
Full TPU kit for the Whoopkit of the ParallaxFPV Valkyrie Mini 3.5".
Note: These TPU parts are only intended for the Whoopkit part of the Valkyrie Mini.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5" frame whoopkit
Weight : ~29.4g
Included
1x TPU set
Voir pl..
20.90€
Ex Tax:17.13€
Model: VIFLY-TOOTHSTOR
The ToothStor from Vifly is a charger intended for 2S batteries.
You can charge up to four batteries equipped with BT3.0 or XH2.54 connectors simultaneously.
In addition to charging the battery at full voltage, you will be able to charge or discharge it to storage voltage for long-term storage.
The ..
39.90€
Ex Tax:32.70€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
103.90€
Ex Tax:85.16€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)