Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: GTSV2-12025-11500KV
New powerful motor from Rcinpower, the GTS V2 1202.5 with 11500KV.
Specifications
KV: 11500
Configuration : 9N12P
Stator diameter : 10mm
Stator Length : 2.5mm
Shaft diameter (inner) : 2mm
Shaft diameter (external): 1.5mm
Dimensions : 15.95*9.1mm (dia)
Weight : ~3.9g
Idle current(5)@5V : 1.3A
N..
14.90€
Brez DDV:12.21€
Model: JH61709
This Mamba MK5 G4 6S 40A AIO from Diatone mounts in 25.5x25.5mm and only supports Alpha, not BetaFlight.
HD and analog compatible, this AIO has an OSD, TVS protection and 4 UARTS.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Specificatio..
100.90€
Brez DDV:82.70€
Model: JH61299
The Reactor 66 ESC supports 4-6S voltage and DSHOT300/600/1200.
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 66A × 4
Burst: 105A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_66
Soft : DSHOT300/600/1200
PWM : 24~128k
Mounting : 20x20mm, M2/M3
Included
1x..
67.90€
Brez DDV:55.66€
Model: JH61608
The Reactor 44 ESC supports 4-6S voltage and DSHOT300/600/1200/MAX2400 (FETTEC).
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 44A × 4
Burst: 54A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_44
Soft : DSHOT300/600/1200/MAX2400 (FETTEC)
PWM : 24~128k
Mounting :..
62.90€
Brez DDV:51.56€
Model: TR-BZ-D002
With a plug design and longer wires than its predecessor, the V2 version of this buzzer lets you connect it to any flight controller as long as there"s a free/available port on it.
How to Connect the Buzzer to Poly F405 2S-4S AIO?
You just need to do the wiring as the diagram below. We have alread..
2.90€
Brez DDV:2.38€
Model: SKY-150710--1
The SkyStars F722 HD + KM60 stack includes an F722 HD 30x30 Pro4 flight controller with a MPU6000 gyro along with a KM60A II 32Bit 3-6S 4in1 ESC to give your quad all the power it needs.
FC Specifications
MCU: STM32F722RGT6 216MHz
Gyroscope: MPU6000
Baro:Bmp280
OSD: Betaflight SPI OSD DJI H..
126.90€
Brez DDV:104.02€
Model: BF14874
FC Specifications
MCU: AT32F435CGU7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLI..
84.90€
Brez DDV:69.59€
Model: HOTA-T8
HOTA"s T8 smart charger allows you to charge and check your 1-8S batteries.
With a maximum power of 650W and a charging current of 22A, the T8 has a heat dissipation system, is convenient to carry due to its small size and lightness and offers an intuitive menu.
Specifications
Input voltage :..
52.90€
Brez DDV:43.36€
Model: 3A30038
Dampers and screws for the Mobula6 frame from Happymodel.
Included
5x Screw
4x Damping ball
Voir plus..
2.90€
Brez DDV:2.38€
Model: GNB15008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1500mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
51.90€
Brez DDV:42.54€
Model: SKIN-DJI-INTEGRA-PSYCH-SPIDER
Bring style to your DJI Goggles Integra !
This Psyche-Spider sticker will perfectly wear your DJI Goggles Integra.
The PVC film used is UV resistant, furthermore it"s rolled to provide a greater sustainability.
With his "Air Free Bubble" system, you will avoid the bubbles during application.
if yo..
20.90€
Brez DDV:17.13€
Model: HDZ3132
This HDZero Freestyle V2 VTX is a 20x20 HD digital 5.8GHz VTX designed for 3.5" and 5" drones.
Supporting 720p60, 1080p30, 540p60 and 540p90 modes, this second generation of the VTX is capable of achieving a max RF output of 1W.
The sockets are protected with CNC housing for durability, RF shielding..
188.90€
Brez DDV:154.84€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)