![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: FW19002826
This set of 4 pads from Flywoo will protect the bottom of the VTX on your FlyLens 85 and thus reduce damage caused by possible shocks.
This will prevent your VTX from coming into contact with the ground.
A simple, affordable and useful solution to protect your equipment...
2.90€
Ex Tax:2.38€
Model: F000780
5mm replacement arm for the FIFTY5 frame by FlyFishRC.
Specifications
Geometry: True-X
Wheelbase:255mm
Arm thickness: 5mm
Top plate thickness: 2mm
Middle plate thickness: 2.5mm
Bottom plate thickness: 2.5mm
Propeller size: 5~5.5 inch
CNC plate thickness: 6mm
FPV cam spacing: 19mm/20mm
Weight: 1..
15.90€
Ex Tax:13.03€
Model: F000784
Keystone for the FIFTY5 frame by FlyFishRC...
2.90€
Ex Tax:2.38€
Model: CINEONC25-GUARDS
These guards for the CineON C25 frame allow it to withstand shocks and the wind...
10.90€
Ex Tax:8.93€
Model: X-FW080012-E1D1-01
This Flycolor single ESC has aluminum heat sinks, multiple protections (current, temperature etc...) and supports all Dshot and Proshot protocols.
Equipped with the ARM 32-bit Cortex MCU, the X Cross 80A supports frequency up to 64MHz, which is 25% higher than the previous generation MCU.
Specif..
86.90€
Ex Tax:71.23€
Model: BCNFI2
Fly ID is a direct remote identification device compatible with all drones.
It is equipped with the EASA DRI (Direct Remote ID) system compliant with the prEN 4709.002 standard in compliance with the regulations in force in Europe for homemade drones and modelers.
The beacon will transmit the ident..
116.90€
Ex Tax:95.82€
Model: AXIS-AF227-2100KV-RACING
Designed for racing, the AF227 Racing motors are extremely durable as they are able to withstand temperatures up to 240°C thanks to their aluminum surface.
This motor powered by 6S and with 2100KV is the choice to make for racing!
Specifications
KV : 2100
Internal resistance: 53mΩ
Voltage: 6S..
26.90€
Ex Tax:22.05€
Model: AXIS-AF227-1960KV-RACING
Designed for racing, the AF227 Racing motors are extremely durable as they are able to withstand temperatures up to 240°C thanks to their aluminum surface.
This motor powered by 6S and with 1960KV is the choice to make for racing!
Specifications
KV: 1960
Internal resistance: 58mΩ
Voltage: 6S..
26.90€
Ex Tax:22.05€
Model: W4-FW060006-M1F7-HW1
This Flycolor stack consists of an F722 flight controller and a 4in1 60A ESC.
With 30.5x30.5mm mounting holes, it supports 3-6S LiPo voltage and is capable of handling 60A continuous current.
FC
Betaflight firmware: STM32F7X2（Config file:FLYCOLORF7MINI）
Betaflight board: FLYCOLORF7MINI.
INAV fi..
146.90€
Ex Tax:120.41€
Model: X4-FW060006-C2F7-K01
This Flycolor stack consists of an F722 flight controller and a 4in1 60A ESC.
With 30.5x30.5mm mounting holes, it supports 3-6S LiPo voltage, Bluetooth, Betaflight and is capable of handling 60A continuous current.
In addition, the X-Tower2 has a 4-way LED port, LEDs configurable on Bataflight.
S..
134.90€
Ex Tax:110.57€
Model: W4-FW060006-M1M1-TX1
The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV.
Bullet Points
PWM frequency up to 64 MHz.
Optimized firmware ..
95.90€
Ex Tax:78.61€
Model: W4-FW045006-G1G1-TX01
Check out the Flycolor Trinx G5 45A 4-in-1 ESC with 45A of continuous current support, you will have plenty of headroom to push your rig to the limit.
With the high-powered MCU and Raptor 5 firmware, this is a path towards the next level for your builds!
Bullet Points
PWM frequency up to 128K..
79.90€
Ex Tax:65.49€