![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: F4-55A-FLYTOWER
The Aikon F4 55A stack consists of an F405 flight controller and a 55A ESC.
This 30x30mm stack supports 3-6S voltage, BLHeli-S firmware and has an OSD and a 16Mb SPI blackbox.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU : STM32..
94.90€
Brez DDV:77.79€
Model: UV-TEXTIL-TAPE
This 5 meter roll of fabric adhesive has the particularity of being able to be cut by hand, thus making your work easier.
In addition to having a width of 15mm, this practical accessory is also fluorescent.
Specifications
Color : Pink, orange, blue, yellow, green or purple
Material : Fabric
Le..
3.90€
Brez DDV:3.20€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.90€
Brez DDV:4.02€
Model: VALKYRIE-MINI-TANTENNA-TPUBYDFR
Support for mounting an immortal T antenna on the rear of the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~0.8g
Included
1x TPU mount
Voir plus..
2.90€
Brez DDV:2.38€
Model: VALKYRIE-MINI-O3-TPUBYDFR
Support for mounting an O3 antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
3.90€
Brez DDV:3.20€
Model: VALKYRIE-MINI-GOPRO-TPUBYDFR
Support to install a GoPro on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~8.3g (with screw and nut)
Included
1x TPU mount
1x Screw
1x Nut
Voir plus..
5.90€
Brez DDV:4.84€
Model: VALKYRIE-MINI-O3-DJI-TPUBYDFR
Support for mounting an O3 camera or DJI FPV camera on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~2g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.90€
Brez DDV:3.20€
Model: DC1050/160C-6S
Dogcom 6S 1050mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
37.90€
Brez DDV:31.07€
Model: TR-PE-0001
This handy module from TuneRC is the perfect tool if you own GPS modules and want to add an external barometer/magnetometer to your builds.
You simply need your flight controller to have SCl/SDA pads to be able to use this module on your quads.
Specifications
Barometer: BMP280
Magnetometer: Q..
14.90€
Brez DDV:12.21€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
8.90€
Brez DDV:7.30€
Model: VALKYRIE-MINI-WHOOPKIT-TPUBYDFR
Full TPU kit for the Whoopkit of the ParallaxFPV Valkyrie Mini 3.5".
Note: These TPU parts are only intended for the Whoopkit part of the Valkyrie Mini.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5" frame whoopkit
Weight : ~29.4g
Included
1x TPU set
Voir pl..
20.90€
Brez DDV:17.13€
Model: VIFLY-TOOTHSTOR
The ToothStor from Vifly is a charger intended for 2S batteries.
You can charge up to four batteries equipped with BT3.0 or XH2.54 connectors simultaneously.
In addition to charging the battery at full voltage, you will be able to charge or discharge it to storage voltage for long-term storage.
The ..
39.90€
Brez DDV:32.70€