![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: AC-TZ01
These Gemfan Gates for Tiny Whoop are perfect for marking your FPV Race course.
Quick setup, multi directional gate.
Dimensions : 80x80cm..
26.97€
Ex Tax:26.97€
Model: HX-CRE-PRO-SET
ProfiCNC/HEX Cube Red Pro Standard Set
The world′s most advanced autopilot for open autonomous unmanned vehicles. Redundant, temperature controlled, isolated.
Equipped with two High Performance H7 Processor. Fully ArduPilot and PX4 supported.
- 2x STM32H757- Ethernet port interface- 3x CAN buses- 4x..
982.70€
Ex Tax:982.70€
Model: MT-ASPD-DLVR
Matek Digital Airspeed Sensor ASPD-DLVR
All sensors DLVR series is the best airspeed sensor ArduPilot currently support.
Specifications & Features• ArduPilot AP_Periph L431/F405/F303 CAN node• All sensors DLVR-L10D, Industrial temperature range• CAN & I2C Interface• Typical Platforms: Fixed-Wing, Qu..
106.48€
Ex Tax:106.48€
Model: FF-AX-B
Alta X in Case (Blue Cube)
We designed Alta X from the ground up to capitalize on the benefits of large, efficient props while maintaining the crisp control and unmatched precision the Alta line is known for.
What makes this Alta X special?
It features a a US-made PX4 Blue Cube.
The Blue Cube is eq..
28,326.97€
Ex Tax:28,326.97€
Brand: ProfiCNC/HEX
Model: HX-COR+
CubePilot- The Cube Orange + (Beta Version)
Features
1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs are temperature-controlled b..
204.84€
Ex Tax:204.84€
Brand: ProfiCNC/HEX
Model: HX-COR+-SET
CubePilot- The Cube Orange + (Beta Version) Set with ADSB carrier board
Features
1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs ..
335.98€
Ex Tax:335.98€
Brand: ProfiCNC/HEX
Model: HX-CBLU-H7
Profi CNC/HEX Blue Cube H7 is made in the USA in an ITAR certified Factory in Fremond, CA. This edition is aimed at military and government.
Product DescriptionThe cube can be used with a range of carrier boards such as the Standard, mini or Kore.
2x CAN (pins reserved for a 3rd Can bus)2x I2C5..
491.72€
Ex Tax:491.72€
Brand: Mauch Electronic
Model: MAU2-054
Input voltage 4-20S, max. 85V !
Power-Cube 4 / V2 with 4 outputs 3x 5.3V / 10A + 1x 12.0V / 10A
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2, 3 or 4 -> Output 1 can"t be changed and must remain..
327.79€
Ex Tax:327.79€
Brand: Mauch Electronic
Model: MAU2-053
Input voltage 4-20S, max. 85V !
Power-Cube 3 / V2 with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2, 3 -> Output 1 can"t be changed and must remain 5.3V..
262.21€
Ex Tax:262.21€
Brand: ProfiCNC/HEX
Model: HX-CUB-ID-CAN
ProfiCNC/HEX Cube ID_CAN
Tiny and low power consumption enable ultra-lightweight drones application.
Enable information broadcasting (e.g. identification number, type of aircraft, etc.)
Design in compliance with “UAS Remote Identification”
FCC/CE certified..
77.79€
Ex Tax:77.79€
Brand: ProfiCNC/HEX
Model: HX-CUB-ID
Tiny and low power consumption enable ultra-lightweight drones application.
Enable information broadcasting (e.g. identification number, type of aircraft, etc.)
Design in compliance with “UAS Remote Identification”
FCC/CE certified..
40.90€
Ex Tax:40.90€
Model: AC-SM-3
These Gemfan Gates for Tiny Whoop are perfect for marking your FPV Race course.
Quick setup, multi directional gate.
Dimensions : 75x75cm..
24.51€
Ex Tax:24.51€