![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: 20948
This QAV-PRO camera mount from Lumenier is designed to accommodate a cinema camera on your Cinelifter such as the Mega Whoop 7" and other frames in the QAV-PRO range.
With this kit, your setup will ensure an exceptional QAV-PRO experience.
Bullet points
Supports RED Komodo, Sony FX6 and DLSR c..
188.90€
Brez DDV:154.84€
Model: VALKYRIE-CAMMOUNT-TPUBYDFR
Support for mounting a micro format camera (19mm) on the ParallaxFPV Valkyrie 5.1".
Specifications
Material : TPU
Compatibility : Parallax Vlakyrie 5.1"
Weight : ~3.2g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.90€
Brez DDV:3.20€
Model: VALKYRIE-MINI-CAMMOUNT-TPUBYDFR
Support for mounting a micro format camera (19mm) on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~2.6g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.90€
Brez DDV:3.20€
Model: 21677
Set of two camera plates intended for QAV-S 2 JohnnyFPV SE frames from Lumenier.
Specifications
Compatibility : QAV-S 2 JohnnyFPV SE 5-7inch / DJI O3 or similar camera
Material : Aluminum / Carbon fiber
Mounting holes : M2
Included
1x 20mm Camera Plate Right
1x 20mm Camera Plate Left
1x A..
25.90€
Brez DDV:21.23€
Model: JENO3-O3-TPUBYDFR
Support for installing a DJI O3 camera or DJI FPV camera on the JeNo 3" from We are FPV.
Specifications
Material : TPU
Compatibility : JeNo 3"
Weight : ~0.8g (2pcs)
Included
1x Set of 2pcs
Voir plus..
2.90€
Brez DDV:2.38€
Model: PUNCH-SHORTY-CAMERA
Camera Mount intended for the Piratframes Punch and Shorty frames.
Specifications
Material : TPU
Easy to install
Weight : ~2.3g
Included
2x TPU mount
Voir plus..
3.90€
Brez DDV:3.20€
Model: 3S20162
This mount is intended to hold the FX17-B camera on your Mobula6 2024.
Specifications
Weight : ~0.6g
Color : Transparent black
Included
1x Camera mount
2x M1.2*5 screw
Voir plus..
4.90€
Brez DDV:4.02€
Model: PUNCH-SHORTY-19MMCAMERA
This TPU mount allows you to install a micro camera on Piratframes Punch and Shorty frames.
Specifications
Material : TPU
Easy to install
Weight : ~2.5g (2pcs)
Included
2x TPU mount
Voir plus..
3.90€
Brez DDV:3.20€
Model: HP0157.RX-GR-01
Take control of your RS gimbal and elevate your cinematic game with the GR-01 from RadioMaster.
The GR-01 ExpressLRS 2.4G receiver was developed for Cinelifter setups that use the DJI RS2 and RS3 Pro gimbal platforms.
The GR-01 features a sturdy aluminum case and built-in USB-C interface for simple ..
57.90€
Brez DDV:47.46€
Model: CB-SBD
Find improved black diamond filters, stronger, with better optics, less glare and much more.
Camera Butter offers you these filters that are even more resistant and will protect the lens even better.
Note : these filter is only for GoPro Hero 8 and 9.
Bullet points
More solidity
Best optics
Le..
16.90€
Brez DDV:13.85€
Model: PHOENIX2-SE-V2
The second version of Runcam"s special edition Phoenix 2 camera has a new design while retaining its strengths.
Dustproof and short circuit proof, the V2 has lens protection and a replaceable lens cap.
Specifications
Image Sensor : 1/2" COMS Sensor
Horizontal Resolution : 1000TVL
Lens : FOV D:..
32.90€
Brez DDV:26.97€
Model: HDZ3213
The HDZero Nano V3 Camera is optimized for a 4:3 aspect ratio but can be configured to 16:9 in the settings.
It"s small and lightweight, making it ideal for whoops and micro drones. Its lens and wide FOV provide the best nano camera image quality for HDZero.
This third version replaces the nano V2 a..
64.90€
Brez DDV:53.20€