Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: NMB-BEARING-NT
This set of 10 NMB 9x4x4 bearings will allow you to replace those that are too worn in your motors starting to squeak a little too much over crashes with humidity.
Compatible with a large majority of 5" motors, remember to measure your current bearings using a caliper to be sure of the correct sizin..
20.90€
Brez DDV:17.13€
Model: M000590
FlyFishRC"s 3500KV Flash 1804 motors, designed with meticulous attention to detail, performance and reliability are perfect for a 4S configuration.
Made for 3.5" frames, they offer increased power and thrust compared to 1404/1504 while maintaining a compact format.
These motors have been designed wi..
18.90€
Brez DDV:15.49€
Model: M000589
FlyFishRC"s 2450KV Flash 1804 motors, designed with meticulous attention to detail, performance and reliability are perfect for a 6S configuration.
Made for 3.5" frames, they offer increased power and thrust compared to 1404/1504 while maintaining a compact format.
These motors have been designed wi..
18.90€
Brez DDV:15.49€
Model: *CAN-L4-RC
This L4 RC CAN adapter from Matek is based on the ArduPilot AP_Periph firmware and allows you to turn a serial receiver into a CAN receiver.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
1x UART(UART3, Tx3/ Rx3)
ST debug, SWCLK & SWDIO
Input voltage range: 4.5~5.5V @..
15.90€
Brez DDV:13.03€
Model: TMOTOR-V50A-ESC-4EN1-SE
The Velox 50A SE 4in1 ESC from T-Motor will guarantee you the performance you are looking for, whether in freestyle, cinematic or long range.
The Velox V50A 32Bit supports 3-6S voltage and measuring 30.5*30.5mm is perfectly suitable for Velox V3 motors.
Specifications
Current : 50A
Peak current..
77.90€
Brez DDV:63.85€
Model: 533-2207HD
Evan Turner"s brand "Headsup" is coming to your favorite store!
The Headsup 2207 1960KV motor from Five33 is a top quality motor in some really great price ranges.
Produced by Xnova, the Headsup meets the highest motors standards to produce insane power with impeccable efficiency.
Specifications..
30.90€
Brez DDV:25.33€
Model: JH61610
This Mamba F405 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 44 ESC supports a 3-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F405 Mini
MCU: STM32F405
GYRO:..
99.90€
Brez DDV:81.89€
Model: GP106036
The GEPRC GEP-M10 series GPS module is defined as small, with fast positioning, stable connection and convenient to use.
It supports GPS + BDS + Galileo + QZSS + SBAS.
The M1025Q has a QMC5883L magnetometer.
Specifications
GPS chip: u-blox M10050
Magnetometer: QMC5883L
Barometer: NO
Input volt..
29.90€
Brez DDV:24.51€
Model: GP106037
The GEPRC GEP-M10 series GPS module is defined as small, with fast positioning, stable connection and convenient to use.
It supports GPS + BDS + Galileo + QZSS + SBAS.
The M1025-DQ has a QMC5883L magnetometer and a DPS310 barometer.
Specifications
GPS chip: u-blox M10050
Magnetometer: QMC5883L..
32.90€
Brez DDV:26.97€
Model: AXIS-C246-1850KV-MR30
"Fly to create" is the slogan representing the association of AxisFlying with the Escape FPV pilot through these new motors dedicated to cinematic flight, the C246.
Here is the 1850KV version with MR30 connectors, intended for the Argus Plug & Play stack (related accessorie), the stack requiring NO ..
26.90€
Brez DDV:22.05€
Model: SB-BLS-55A
The SpeedyBee BLHeli_S 55A 4in1 ESC mounts in 30.5x30.5mm, has a TVS protection diode and supports DSHOT300/600, a voltage of 3-6S and has BLHeli_S J-H-40 firmware.
Specifications
Firmware : BLHeli_S J-H-40
Wireless Configuration : Full Configuration Supported in the SpeedyBee app
Continuous C..
53.90€
Brez DDV:44.18€
Model: SB-F405-V4
The SpeedyBee F405 V4 flight controller mounts in 30.5x30.5mm, configures via Bluetooth and is compatible with the DJI O3 / Runcam Link / Caddx Vista and DJi air unit VTX.
The FC is equipped with an ICM42688P gyro, a USB Type-C port, a barometer and an ATZ456E OSD.
Specifications
MCU : STM32F4..
48.90€
Brez DDV:40.08€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)