Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: 01010040_1
The Pavo20 Pocket from BetaFPV was designed for DJI users who are getting started in the world of FPV.
Very practical to transport, this Pavo20 is equipped with an auxiliary flight function with N/S/M and Turtlemode, perfect for beginners" learning.
Designed to carry a DJI O3 system (not included), ..
118.90€
Brez DDV:97.46€
Model: 01040016_1
BetaFPV"s G473 brushless AIO is the first 1S using the STM32G473CEU6.
Equipped with the ICM42688P gyroscope, 5A ESC and 5.8G 25-400mW VTX, this AIO is very lightweight and will allow you to manage your drone"s posture and movement precisely to a higher level.
This is the advanced choice for future u..
52.90€
Brez DDV:43.36€
Model: 01010037_2
"Master of 3.5", Master the sky"
BetaFPV"s Pavo35 is a revolutionary Cinewhoop made from CNC 7075 aluminum eliminating any distortion or flex during flight.
This 3.5" which can accommodate a VTX HD or analog is intended to be the most powerful and most responsive of all Cinewhoops of this size.
Cons..
341.90€
Brez DDV:280.25€
Model: 01010003_1--1
A first for a Drone of this size, the Cetus PRO has an altitude hold function and 3 flight modes to progress with confidence.
By the quality of its flight, the Cetus PRO Drone from BetaFPV will give you sensations worthy of a Racer!
Bullet Points
Auxiliary flight function is suitable for beginne..
145.90€
Brez DDV:119.59€
Model: 1060008
This camera and VTX are intended for the Cetus Lite from BetaFPV.
With a light weight of 2.47g, this part allows 800TVL resolution and good image quality thanks to the 1/4" CMOS sensor.
Get wide, sublime shots with the 1.8mm lens and 150° FOV.
* Important note: French regulations impose a maximum po..
19.90€
Brez DDV:16.31€
Model: 1060007
BetaFPV"s C03 camera features a weight of 1.45g, a resolution of 1200TVL and has been designed to deliver superb performance for micro quads.
It has a 2.1mm lens with a 160° field of view.
A perfectly adapted canopy is supplied with the camera, which will allow you to build your quads more easily.
..
24.90€
Brez DDV:20.41€
Model: 01100005
New Micro Air canopy from BetaFPV, extremely light and easy to adjust the angle from 25 to 50°.
Compatible with cameras with a lens diameter of 9-10mm such as the C02/C03 cameras, the Avatar HD Lite or the Ant Lite.
The micro air canopy is the perfect choice if you want to build or improve ultra-lig..
3.90€
Brez DDV:3.20€
Model: 01060009_2--1
The C04 nano camera is intended for BetaFPV"s Cetus X.
It is equipped with an antenna as well as the integrated VTX M04.
Note: Only compatible with Cetus FC version, check that your connector has 3 pins.
* Note importante : La réglementation française impose une puissance maximum de 25mW dans la f..
53.90€
Brez DDV:44.18€
Model: 01010039
Defy gravity and embark on an unforgettable journey with the Air65!
More impressive and more efficient than the Meteor series, this 65mm whoop weighs only 17g and is available in two versions.
The first is an Air65 with a propulsion system for Racing, it is equipped with 0702SE 27000KV motors and Ge..
120.90€
Brez DDV:99.10€
Model: 01010038_2
Defy gravity and embark on an unforgettable journey with the Air75!
More impressive and more efficient than the Meteor series, this 75mm whoop weighs only 21g.
The Air75 has the first AIO using the G473 processor. It seamlessly integrates FC, ESC, OSD and VTX.
We recommend using a 1S 450mAh battery...
120.90€
Brez DDV:99.10€
Model: 01130003_3
This set of 15 PEEK screws will allow you to reduce the weight of your whoop.
Stronger, stronger and more durable than nylon screws, these screws save up to 0.46g for construction using metal screws.
PEEK screws are therefore perfect for building 65/75mm whoops such as the Meteor.
Included
15x ..
8.90€
Brez DDV:7.30€
Model: 01090021_2
Whoop Duct for BetaFPV Pavo25 V2.
Included
1x Whoop Duct
Voir plus..
9.90€
Brez DDV:8.11€