Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
179.90€
Brez DDV:147.46€
Blagovna znamka: Gremsy
Model: GR-S1-UBEC
A switching power supply that has dual outputs (12V-5A, 5V-1A) and accept wide input range from 14V to 52V, comes in a small and lightweight module. This UBEC should be used with the S1 where power for camera and accessories is needed on the tilt stage of the gimbal. Connect output of the UBEC to th..
79.90€
Brez DDV:65.49€
Blagovna znamka: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
94.90€
Brez DDV:77.79€
Blagovna znamka: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
179.90€
Brez DDV:147.46€
Blagovna znamka: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
74.90€
Brez DDV:61.39€
Blagovna znamka: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
124.90€
Brez DDV:102.38€
Model: rpmax-bec
A versatile device that converts a high input voltage from say a flight battery into a selectable (3 setting), stable output voltage and a maximum of 5A current. Useful for all types of model but particularly multi-rotors. Whether it powers the reciever, lights or other auxilliaries the choice is yo..
30.90€
Brez DDV:25.33€
Model: B0103852
Supply Cable for the Iflight GoCam PM G3 Camera
Specifications
Weight: 5.5g
Support: 4S-6S
Output: 5V/3A
Input Connector: XH2.54
Outpu..
9.90€
Brez DDV:8.11€
Model: XH254-TYPEC-5V
Save space and weight by replacing the battery with this SpeedyBee BEC.
Power your HD camera with the supplied JST1.25 connectors.
This BEC is compatible with GoPros 6/7/8/9/10 and 11, Runcam Thumb, Thumb Pro and DJI Action3.
Note: GoPro Hero 10/11 recordings without battery require labs version fi..
13.90€
Brez DDV:11.39€
Blagovna znamka: iFlight
Model: B012912
This BEC module from Iflight offers the possibility of switching from an input voltage of up to 35V to a stable voltage.
It makes it possible to reach an output current of 2A/3A on a wide supply voltage (6 to 35V).
..
10.90€
Brez DDV:8.93€
Blagovna znamka: Matek
Model: MBEC6S
Micro BEC 1.5Amp 5V / 9V from Matek Systems.
Sold by 3pcs
Specifications
High Efficiency Synchronous Step-down regulator
Wide 6V to 3..
10.90€
Brez DDV:8.93€
Blagovna znamka: Matek
Model: BEC12S-PRO
The BEC12S PRO has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 5g, it offers three output voltage options (5.2V/8V/12V)...
23.90€
Brez DDV:19.59€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)