![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: HARDLINE-2208-2000-UNIT
New series of Hard Line motors from Xnova with this 2208 intended for freestyle and cinematic.
Fully tested and precisely balanced, the motor is simple to tune, is efficient and has a new design with a fully aluminum-encased rotor.
Specifications
KV : 2000
No-Load current (@10V) : 1.6A
Weight ..
36.90€
Brez DDV:30.25€
Model: GTSV2-12025-11500KV
New powerful motor from Rcinpower, the GTS V2 1202.5 with 11500KV.
Specifications
KV: 11500
Configuration : 9N12P
Stator diameter : 10mm
Stator Length : 2.5mm
Shaft diameter (inner) : 2mm
Shaft diameter (external): 1.5mm
Dimensions : 15.95*9.1mm (dia)
Weight : ~3.9g
Idle current(5)@5V : 1.3A
N..
14.90€
Brez DDV:12.21€
Model: BOOSTYBOI
Fractal"s Boostyboi 5V booster will allow you to extend your VTX voltage range on the 1S versions.
Extend flight time and improve the reliability of your video with this voltage booster.
Specifications
Module Properties: non-isolated step-up module (BOOST)
Input voltage: 1.8-5V
Output voltag..
9.90€
Brez DDV:8.11€
Model: TR-BZ-D002
With a plug design and longer wires than its predecessor, the V2 version of this buzzer lets you connect it to any flight controller as long as there"s a free/available port on it.
How to Connect the Buzzer to Poly F405 2S-4S AIO？
You just need to do the wiring as the diagram below. We have alread..
2.90€
Brez DDV:2.38€
Model: GNB15008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1500mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
51.90€
Brez DDV:42.54€
Model: MOUSSE-GOGGLES2-V3--1
V3 replacement foam for the DJI Goggles 2 and DJI Integra goggles.
This format includes an increased height of the sponge on both sides eliminating the problem of light leakage.
The high compressibility of the foam ensures an optimal distance between the lens and the eyes.
Finally, the ergonomic sha..
14.90€
Brez DDV:12.21€
Model: HDZ3132
This HDZero Freestyle V2 VTX is a 20x20 HD digital 5.8GHz VTX designed for 3.5" and 5" drones.
Supporting 720p60, 1080p30, 540p60 and 540p90 modes, this second generation of the VTX is capable of achieving a max RF output of 1W.
The sockets are protected with CNC housing for durability, RF shielding..
188.90€
Brez DDV:154.84€
Model: WNPJ-00027
Redbird antennas for Walksnail Avatar Goggles X.
Specifications
Bandwidth : 5600-6000MHz
Polarization : LHCP
Gain : 1.5dBi
VSWR :..
13.90€
Brez DDV:11.39€
Model: WNPJ-00028
Foam for Walksnail Avatar Goggles X.
You have the choice between two foam formats:
- the wide version in PU.
- the small version in polyurethane water.
Included
1x Foam
Voir plus..
10.90€
Brez DDV:8.93€
Model: WN08-6S14B
New version of the Walksnail Avatar HD PRO kit with two antennas for more power!
This kit consisting of the Avatar HD Pro micro camera, the Avatar HD Pro V2 VTX and two antennas will allow you to fly in the most complex conditions thanks to improved transmission performance.
The new VTX with improve..
204.90€
Brez DDV:167.95€
Model: WN01-FP002
Get more power and more stability with this new version of the VTX Avatar HD from Walksnail has two UFL IPEX connectors to connect 2 antennas.
20x20mm and 25x25mm mounting holes are available for wider compatibility.
The VTX Avatar HD V2 32G supports Gyroflow.
It can record your 1080p or 720p HD fli..
146.90€
Brez DDV:120.41€
Model: A000722
With its lightweight design, new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength and clarity, and is now available to FPV pilots at an incredibly attractive price.
Although the Osprey Antenna is both small and light, it does not sacrifice any performance ..
9.90€
Brez DDV:8.11€