Išči

Hitri pregled

Model: DJI-CARE-AVATA-1

DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind. In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..

49.90€

Brez DDV:40.90€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: AR0056623

DJI Avata 2 Sling Bag

Transport your DJI Avata 2 drone without any hassle with this DJI sling bag. You can store the DJI Avata 2, the DJI Goggles 3, the DJI RC Motion 3 as well as the charging hub and your batteries there. Included 1x Sling Bag Note : Only the bag is included Voir plus..

83.90€

Brez DDV:68.77€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Set of ND 8/16/32 Filters For DJI Avata 2

Model: AR0056622

Set of ND 8/16/32 Filters For DJI Avata 2

Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone. The ND filter will reduce the amount of light that enters the camera sensor. Specifications Weight : 0.7g / filter Compatibiltity : DJI Avata 2 drone Diameter : 26*24mm Included 1x ND8 filter 1x ND16 filter 1x ND32 filter Note ..

62.90€

Brez DDV:51.56€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: SDC-XT60

DJI Power SDC to XT60 power cable (12v)

Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector. Specifications Dimensions: 40cm Connector: SDC Output connector : XT60 female Output voltage : 12 volts Included 1x SDC to XT60 female 12v cable Voir plus..

23.90€

Brez DDV:19.59€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: POWER1000-BAG

DJI Power 1000 Protective Storage Bag

Ideal for transporting, storing and protecting the DJI Power 1000. The carrying bag has space for all the necessary cabling. Equipped with air vents and zips, no need to take the DJI Power 100 out to use it! Specifications Dimensions: 452 x 240 x 232 mm (L x W x H) Compatibility: DJI Power 10..

104.90€

Brez DDV:85.98€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: DJI-CARE-AVATA2-2A

DJI Care Refresh for DJI AVATA 2 (2 years)

DJI Care Refresh provides up to 3 replacements over 2 years per for a small additional charge and covers a wide variety of accidents, providing greater peace of mind. In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first rep..

104.90€

Brez DDV:85.98€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Li-Ion 4S 2150mAh Battery For DJI Avata 2

Model: AR0056619

Li-Ion 4S 2150mAh Battery For DJI Avata 2

Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery. Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh. 4 LEDs and a button will allow you to know the battery charge status. Specifications Type: Li-Ion Voltage: 1..

126.90€

Brez DDV:104.02€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: HEATSINK-O3-NINJA

DJI O3 VTX Heatsink By NinjaTech

This heatsink is for the DJI O3 Air Unit. It enables improved cooling performance for the high power consumption of O3. Included 1x Heatsink 4x Screw 1x Thermal grease Note : DJI O3 VTX not included Voir plus..

5.90€

Brez DDV:4.84€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: AR0056621

DJI Avata 2 Battery Charging Hub

This hub for the smart batteries of the DJI Avata 2 drone will allow you to charge 3 batteries in sequence (one after the other). Specifications Input: 5-20V, 3A max. Output (energy accumulation): 65W max. Output (charging): 17V max. Output (USB): 5V, 2A Charging type: Charges three batteries i..

63.90€

Brez DDV:52.38€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: DJI-CARE-AVATA2-1

DJI Care Refresh for DJI AVATA 2 (1year)

DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind. In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..

63.90€

Brez DDV:52.38€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: SP40

Adapter Plates For DJI O3 By RushFPV

This carbon adapter for DJI O3 from RushFPV allows good cooling of the VTX by increasing the heat dissipation space. The plate is mounted in 20x20mm (M2) or 25.5x25.5mm (M1.6). Included 1x Plate 5x Screw Voir plus..

4.90€

Brez DDV:4.02€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: VALKYRIE-FRAME

Valkyrie 5.1Inch Frame Kit By Parallax

The Valkyrie is Parallax FPV"s ultra-versatile 5.1-inch frame. Compatible with O3, HDZero, Walksnail and analog, this frame allows you to obtain a quad with an optimized weight/durability ratio thanks to its worked shapes and its high quality T700 carbon. This frame has the necessary space to comfor..

100.90€

Brez DDV:82.70€