![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: DJI-P4-PCWB
Phantom 4 9450S Quick Release Propellers CW Black Ring..
10.90€
Brez DDV:8.93€
Model: DJI-P4-PCCWB
Phantom 4 9450S Quick Release Propellers CCW Black Silver Ring..
10.90€
Brez DDV:8.93€
Model: DJI-P4-MOTB
Phantom 4 2312S Motor Black Obsidian without adapter..
34.90€
Brez DDV:28.61€
Model: FF-MOVI-PC
An affordable case for everyone who loves to use their camera phone. Its thin, durable, rubberized body protects your phone from parking lot drops, tree branch scratches, and the occasional “I drank too much; where’d I leave my phone?” nights out.
Available in black canvas, the back of the case prov..
43.90€
Brez DDV:35.98€
Model: c1665
13x6.5 Carbon Fiber V2 propellers 6mm hole!
These propellers provide agility, added thrust and efficiency.
Again, polished and balanced from tip-tip, these propellers are a fantastic addition to any heavy lift platform.
These propellers are best suited to MK 3538, MK 3638, QC 3328 and AXI 2814/20 m..
69.90€
Brez DDV:57.30€
Model: inset85
Insert to reduce the bore hole of der E-Prop - Propeller.
Delivery
1 piece
Under Notes write which one u want to have...
1.90€
Brez DDV:1.56€
Model: powerstrip
Features:
Distributes power from a power supply to five electrical devices
Three channels are equipped with switches and orange LEDs for current
up to 10 Amperes each
Two channels for high current up to 40 Amperes(total) with green LEDs
All channels protected by fuse
Aluminum body for superior heat..
36.90€
Brez DDV:30.25€
Model: cf300pro
CF300 PRO 3 axis Gimbal.
On this gimbal fits almost every camera with extremly powerfull hispeed titanium servos with 40kg torque and antivibrations system.
Stabilization done with 2x picloc 3x. The weight of gimbal is under 2kg. Made of 2mm carboon and extremly strong, tested on more then 30 kg.
Un..
1,830.90€
Brez DDV:1,500.74€
Top Brand
Model: ppmi2ccboard
PPM / I2C Breakout Board Setfor standard servo connector and solder points for I2C..
19.90€
Brez DDV:16.31€
Model: clohelic
The longest range what u can get is with this combo.
5.8GHz Cloverleaf Antena + Helical Axial antena with 13 dbi in case.
This is great setup for FPV TBS or other users...
30.90€
Brez DDV:25.33€
Blagovna znamka: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
7.90€
Brez DDV:6.48€