Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-076
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
47.46€
Ex Tax:47.46€
Brand: Mauch Electronic
Model: MAU2-074
100A - Current measurement sensor board, based on Allegro Hall Sensor ACS-100U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
45.00€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
147.46€
Ex Tax:147.46€
Brand: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
61.39€
Ex Tax:61.39€
Brand: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
102.38€
Ex Tax:102.38€
Model: vortexmobius
Vortex Mobius Incliner Kit
An updated anti-jello plate for the Vortex, which inclines the Mobius by 20 degrees, for optimal camera angle when flying at speed.
Includes:
1x Baseplate (Carbon Fiber)
1x Top Plate (Carbon Fiber)
2x 20 degree Side Plate (Carbon Fiber)
4x M3 Aluminium Nut
4x M3 Aluminiu..
23.69€
Ex Tax:23.69€
Model: 1H50024
New from HappyModel, the Bassline inspired by the Nathan Loopz pilot is a micro drone 2 ".
This Toothpick 2S is made up of a 3K carbon plate and is compatible with Elrs, Frsky or Flysky.
..
15.49€
Ex Tax:15.49€
Model: TAA5001S95JSL
Tattu R-Line 500mAh 3.7V 95C 1S1P Lipo Battery has full capacity and discharge rate. It is a high discharge rate FPV racing lipo battery. The 95C gives you enough power under load. It is very compact in size and very light in weight. Works perfectly with your Multirotor FPV from size 100 to 180.
..
7.30€
Ex Tax:7.30€
Model: TAA12006S15X6
New range of Tattu lipo batteries with the R-Line 5.0 Version!
This latest update brings more punch, lower internal resistance as well as less weight. The fifth R-Line version also uses the new Tattu "Al Boehmite" technology, offering a significant improvement in overall performance and continuous p..
37.62€
Ex Tax:37.62€
Model: TAA14006S15X6
New range of Tattu lipo batteries with the R-Line 5.0 Version!
This latest update brings more punch, lower internal resistance as well as less weight. The fifth R-Line version also uses the new Tattu "Al Boehmite" technology, offering a significant improvement in overall performance and continuous p..
39.26€
Ex Tax:39.26€
Model: TAA13006S13X6
Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
..
35.98€
Ex Tax:35.98€
Model: TAA14006S13X6
Tattu R-Line Version 4.0 1400mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries,..
37.62€
Ex Tax:37.62€