![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: DC1550/160C-6S
Dogcom 6S 1550mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
47.90€
Brez DDV:39.26€
Model: HP0110.0030-EU
The ToolkitRC Q6AC charger has dual AC/DC inputs and four XT30/XT60 outputs.
In addition to charging your batteries, you can also use the USB-A and USB-C ports to power your tablet or laptop.
The Q6AC has a built-in fan that promises optimal heat dissipation. Its internal memory allows you to save u..
261.90€
Brez DDV:214.67€
Model: VCI-DOVE-PNP
The DOVE flying wing from Vulcan Innovation features a small fuselage and is designed to increase battery life.
It is compatible with the DJI O3 air unit and analog systems.
Its structure and the carbon fiber that composes it give it better stability and life compared to ordinary wood.
The two-color..
199.90€
Brez DDV:163.85€
Model: T014716
The Commando 8 Iflight radio with fully integrated ExpressLRS is now available in Lite version.
Also equipped with a TCXO crystal oscillator, the Commando 8 Lite is much lighter than the original (~280g).
The SMD antenna is integrated and the gimbal is removable, which makes portability and transpor..
88.90€
Brez DDV:72.87€
Model: THUNDER-2207-2100KV-UNIT
You are looking for race performance, speed and agility?
Xnova"s Black Thunder motors are precisely what you wanted, with their new design, the 2207 motors in 2100KV feature high torque for ultimate efficiency.
Specifications
KV : 2100
No-Load Current (@10V) : 1.4A
Weight : ~31.7g (with wires)..
32.90€
Brez DDV:26.97€
Model: TPU-3DFR-250G
After several months of testing on our own 3D prints, discover this high quality TPU filament signed DFR!
All of our 3D parts are printed with this flexible 1.75mm diameter TPU that meets the qualities of reliability and durability, 3DFR will meet all your 3D printing needs.
You print occasionally o..
12.90€
Brez DDV:10.57€
Model: F4-55A-FLYTOWER
The Aikon F4 55A stack consists of an F405 flight controller and a 55A ESC.
This 30x30mm stack supports 3-6S voltage, BLHeli-S firmware and has an OSD and a 16Mb SPI blackbox.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU : STM32..
94.90€
Brez DDV:77.79€
Model: UV-TEXTIL-TAPE
This 5 meter roll of fabric adhesive has the particularity of being able to be cut by hand, thus making your work easier.
In addition to having a width of 15mm, this practical accessory is also fluorescent.
Specifications
Color : Pink, orange, blue, yellow, green or purple
Material : Fabric
Le..
3.90€
Brez DDV:3.20€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.90€
Brez DDV:4.02€
Model: VALKYRIE-MINI-TANTENNA-TPUBYDFR
Support for mounting an immortal T antenna on the rear of the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~0.8g
Included
1x TPU mount
Voir plus..
2.90€
Brez DDV:2.38€
Model: VALKYRIE-MINI-O3-TPUBYDFR
Support for mounting an O3 antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
3.90€
Brez DDV:3.20€
Model: VALKYRIE-MINI-GOPRO-TPUBYDFR
Support to install a GoPro on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~8.3g (with screw and nut)
Included
1x TPU mount
1x Screw
1x Nut
Voir plus..
5.90€
Brez DDV:4.84€