Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
DJI Avata 2 Fly More Combo, pure adrenaline!
Treat yourself to an immersive and stimulating FPV drone experience with optimized image, security and a..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
These are good quality twisted extension leads with a JR style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.
Specs:Connector Type: JR, 1 x male, 1 x femaleLength: 3..
Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.
Specs:
Lead Length: 40cmmWire gauge: 22AWGWeight: 8gPlug type: JR
Delivery 1 piece..
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup.
The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment.
REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
TBS EzUHF to JR/Graupner/Hitec/etc cable
TBS custom-made EzUHF adapter cable for the DSC (mono jack) type transmitters. Includes a separate power lead so you don"t need to go soldering that one up either.
Features:
Fully molded, advanced strain relief for superb reliability
Mono jack for your tran..
ImmersionRC EzUHF JR module TX
The module to add portability to your setup. Plugs into the back of your remote control (check compatibility below) without all the cabling. A little less power than his big brother, but still plenty for the added convenience.
500mW of EzUHF Power
JR Module, compatib..
Twisted 10CM Male to Male Servo Lead (JR) 22AWGQuality wire and connectors used.Great for your project that experience high or secure loads without interferance.Spec.:Weight: 2.5gLead length: 10cm
Scope of delivery: 1 pieces...
Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.
Specs:
Lead Length: 60cmmWire gauge: 22AWGWeight: 11gPlug type: JR
Delivery 1 piece..
20cm Male to Male Servo Lead (JR) 26AWGQuality wire and connectors used.Great for your project that experience high loads.Spec.:Weight: 2.4g(Each)Lead length: 20cm
Quantity: 1pcs..