%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: Mauch Electronic
Model: MAU2-010
This sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.
The main purpose of this hub is to replace ex..
45.00€
Brez DDV:45.00€
Blagovna znamka: Mauch Electronic
Model: MAU2-080
This sensor hub is to connect two Standard Line (HS) current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.
The main purpose of this hub is t..
49.10€
Brez DDV:49.10€
Model: p3hub
Intelligent charging management, capable of automatically charging up to four batteries.
Each battery‘s status is shown using LED indicators.
Small and easy to carry.
Internal power management ensures safety at all times.
Integrated port enables future firmware updates.
Compatible with the Phantom 3..
81.89€
Brez DDV:81.89€
Model: insp1hub
Inspire 1 Battery Charging Hub
Small and easy to carry, the Inspire 1 Battery Charging Hub enables you to charge up to four Inspire 1 Intelligent Flight Batteries. When used, the charging hub automatically selects the individual battery with the highest amount of remaining power, and charges it unt..
81.89€
Brez DDV:81.89€
Blagovna znamka: DJI
Model: AR0050151
This hub for batteries of the DJI Avata drone will allow you to charge 4 batteries in sequence (one after the other).
Allow approximately 47 minutes for your battery to be fully charged.
..
39.26€
Brez DDV:39.26€
Blagovna znamka: Matek
Model: FCHUB-12S-V2
Designed for the XClass, the second version of the Matek FCHUB-12S 440A PDB with 5/12V BEC has an 8pin JST-SH connector as well as a 1K:20K voltage divider.
PDB
Input voltage range: 8~60V..
28.61€
Brez DDV:28.61€
Blagovna znamka: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
6.48€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-013
The Sensor Hub X8 collects the current measurements from up to eight Power-Cube current sensors. The currents are summed up and passed to the Pixhawk flight controller via the Power-Cube power supply. The voltage measurement of the LiPo packs is measured separately by the Power-Cube.
An OLED display..
163.85€
Brez DDV:163.85€
Blagovna znamka: DJI
Model: DJI-IN2-INSP1TO2
DJI Inspire 2 - Inspire 1 Adapter to Inspire 2 Charging Hub Power Cable (PART42)
This cable is used to connect the Inspire 2 Battery Charging Hub to the Inspire 1 Battery Charger (compatible with both 180 W and 100 W Battery Chargers) for Inspire 2 battery charging.Contents:1x Adapter cable..
9.75€
Brez DDV:9.75€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
9.75€
Brez DDV:9.75€
Model: p2pa9
Phantom 2 FPV Cable & Hub Part 9..
10.57€
Brez DDV:10.57€
Model: DJI-MA-HUB
Mavic - Battery Charging Hub..
37.62€
Brez DDV:37.62€