%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: AR0056588
The DJI Focus Pro motor is an essential accessory for the DJI RS 4 stabilizer.
It allows controlling the lens focus via the dial or adjusting the lens zoom via the joystick, this smooth operation allows effective lens control.
Specifications
Transmitter power:..
120.41€
Ex Tax:120.41€
Model: AR0056623
Transport your DJI Avata 2 drone without any hassle with this DJI sling bag.
You can store the DJI Avata 2, the DJI Goggles 3, the DJI RC Motion 3 as well as the charging hub and your batteries there.
Included
1x Sling Bag
Note : Only the bag is included
Voir plus..
68.77€
Ex Tax:68.77€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
51.56€
Ex Tax:51.56€
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
19.59€
Ex Tax:19.59€
Model: POWER1000-BAG
Ideal for transporting, storing and protecting the DJI Power 1000.
The carrying bag has space for all the necessary cabling.
Equipped with air vents and zips, no need to take the DJI Power 100 out to use it!
Specifications
Dimensions: 452 x 240 x 232 mm (L x W x H)
Compatibility: DJI Power 10..
85.98€
Ex Tax:85.98€
Model: DJI-CARE-AVATA2-2A
DJI Care Refresh provides up to 3 replacements over 2 years per for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first rep..
85.98€
Ex Tax:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
104.02€
Ex Tax:104.02€
Model: AR0056876
This adapter was designed by DJI to be able to connect the DJI Mic 2 to Sony cameras without using a 3.5mm TRS cable.
Its design allows it to be installed in the shoe of the Sony device where you can attach the DJI Mic 2 receiver.
As a result, the latter will be connected to the adapter interface an..
31.07€
Ex Tax:31.07€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
11.39€
Ex Tax:11.39€
Model: AR0056467
This 3.5mm TRS audio cable for DJI Mic 2 allows you to remove the receiver from your camera, while leaving it plugged in.
Included
1x Cable
Voir plus..
17.95€
Ex Tax:17.95€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
4.84€
Ex Tax:4.84€
Model: AR0056621
This hub for the smart batteries of the DJI Avata 2 drone will allow you to charge 3 batteries in sequence (one after the other).
Specifications
Input: 5-20V, 3A max.
Output (energy accumulation): 65W max.
Output (charging): 17V max.
Output (USB): 5V, 2A
Charging type: Charges three batteries i..
52.38€
Ex Tax:52.38€