Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: VCI-0702-27000KV
Discover Vulcan Innovation and its 0702 motors intended for micro whoops.
These 27000KV motors offer precise control and a very fast response time.
Their reduced body provides unparalleled agility, even in tight spaces.
The VCI Spark 0702 have a 1mm pressure shaft and will be perfect combined with 3..
38.90€
Brez DDV:31.89€
Model: THUNDER-2207-2100KV-UNIT
You are looking for race performance, speed and agility?
Xnova"s Black Thunder motors are precisely what you wanted, with their new design, the 2207 motors in 2100KV feature high torque for ultimate efficiency.
Specifications
KV : 2100
No-Load Current (@10V) : 1.4A
Weight : ~31.7g (with wires)..
32.90€
Brez DDV:26.97€
Model: VCI-0702-29000KV
Discover Vulcan Innovation and its 0702 motors intended for micro whoops.
These 29000KV motors offer precise control and a very fast response time.
Their reduced body provides unparalleled agility, even in tight spaces.
The VCI Spark 0702 have a 1mm pressure shaft and will be perfect combined with 3..
38.90€
Brez DDV:31.89€
Model: F4-55A-FLYTOWER
The Aikon F4 55A stack consists of an F405 flight controller and a 55A ESC.
This 30x30mm stack supports 3-6S voltage, BLHeli-S firmware and has an OSD and a 16Mb SPI blackbox.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU : STM32..
94.90€
Brez DDV:77.79€
Model: RD15669
The Mach R5 provides racing pilots with a high-quality FPV drone while allowing DIY customization.
The carbon plates and plastic components provide an improved internal structure layout, which simplifies maintenance while reducing the overall weight of the drone and thus providing better stability.
..
390.90€
Brez DDV:320.41€
Model: VALKYRIE-MINI-O3-DJI-TPUBYDFR
Support for mounting an O3 camera or DJI FPV camera on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~2g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.90€
Brez DDV:3.20€
Model: DC1050/160C-6S
Dogcom 6S 1050mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
37.90€
Brez DDV:31.07€
Model: TR-PE-0001
This handy module from TuneRC is the perfect tool if you own GPS modules and want to add an external barometer/magnetometer to your builds.
You simply need your flight controller to have SCl/SDA pads to be able to use this module on your quads.
Specifications
Barometer: BMP280
Magnetometer: Q..
14.90€
Brez DDV:12.21€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
8.90€
Brez DDV:7.30€
Model: VIFLY-TOOTHSTOR
The ToothStor from Vifly is a charger intended for 2S batteries.
You can charge up to four batteries equipped with BT3.0 or XH2.54 connectors simultaneously.
In addition to charging the battery at full voltage, you will be able to charge or discharge it to storage voltage for long-term storage.
The ..
39.90€
Brez DDV:32.70€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
103.90€
Brez DDV:85.16€
Model: LIPO-PAD-DFR
Just as grippy as their predecessors, these 3 lipo pads are even thinner and lighter.
They allows you to keep the battery stationary while further reducing the overall weight of your drone.
Specifications
Dimensions : 100*50*1.5mm
Weight : ~8.4g (1pc)
Included
3x Lipo pad
Note : Battery ..
10.90€
Brez DDV:8.93€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)