%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: JST-XH-ADAPTER
Balance board adapter for batteries with EH balance plug. For lithium batteries 2 to 6 elements...
5.90€
Brez DDV:4.84€
Blagovna znamka: TBS
Model: TBS-TANGO2-BMS
Replacement BMS Board for the tango2 lipo.
Includes
1 x Tango 2 BMS Board
..
4.90€
Brez DDV:4.02€
Blagovna znamka: TBS
Model: TBS-TMB
TBS Unify Pro32 Nano and Crossfire Nano Mounting Board for toothpick style rigs.
TBS Unify Pro32 Nano and Crossfire Nano RX mounting board for toothpick style rigs. (26 x 26 mounting pattern..
3.90€
Brez DDV:3.20€
Model: DE15
Consists of 3X high power TVS Diodes and 1X 35V 470μf Capacitor.
Provides extra protection against voltage spikes.
6S rated...
7.90€
Brez DDV:6.48€
Blagovna znamka: iFlight
Model: P011656
In order to avoid a bad welding or a waste of electronic components, this practice board is the perfect tool to improve your skills in welding before carrying it out on expensive parts.
You can practice soldering small pins or even larger gauge wires.
..
3.90€
Brez DDV:3.20€
Model: SKY-150714
This Skystars kit consists of 4 bars each equipped with 4 2812 RGB LEDs.
These race wire LEDs have two functions:
- Race wire only (motor supply via external pads).
- LED by adding three other wires (inner pads) to power and assign the LED colors.
You can use Race wire alone or Race wire + LED.
..
10.90€
Brez DDV:8.93€
Blagovna znamka: Mauch Electronic
Model: MAU2-001
50A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U.
Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BEC..
54.90€
Brez DDV:45.00€
Model: hexartf
Hexa power board Plug and play RTF.
No more problems with soldering, bad contacts and IC2 problems.
- industrial soldered - preconfigured- tested- extra special cooling- DC converter 12V for powering video transmiter, ...- power cable for LIPO- added 3x low impendance elko 330/25- plug and play..
462.90€
Brez DDV:379.43€
Model: par6deans
Charge SIX (2~6S) lipo packs with same capacity & cell count simultaneously with this parallel charging board.That means you can charge 6 3S 2200mAh or more at the same time with a standard charger!Spec.Cell: 2~6SVoltage: 0~22.2VDCMax current: 30ABattery: 6 packs same capacity & cell countConn..
19.90€
Brez DDV:16.31€
Model: powerboards
Multirotor Power Distribution Board
Suitable for power distribution with normal ESC"s.
This is a power distribution board and LED driver. Made from 1mm FR-4 material and 2oz copper. Driver for 2 channels of LEDs is available. 7805-style regulator can be added to the board to provide 5V output. 8+4 ..
19.90€
Brez DDV:16.31€
Model: ppmi2ccboard
PPM / I2C Breakout Board Setfor standard servo connector and solder points for I2C..
19.90€
Brez DDV:16.31€
Model: gryphon6
Power Distribution Board 6 with dual bec for most advanced users.
For HEXA Multicopter (Equipped with 12 pair of 3.5mm plug)
SPECIFICATIONS
- Up to 6 ESC/Motor can be connect to the Board
- 260A (Continuous), 320A (Peak) - 2 layout with 2oz(70um) Copper Dual PCB.
- Gold plated with black soldermask
..
72.90€
Brez DDV:59.75€