Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: SB-MARIO5-CF-JB-DC
Arm designed for the SpeedyBee Mario 5 DeadCat frame.
Included
1x Arm
Voir plus..
6.90€
Brez DDV:5.66€
Model: MF8D-FRAME
SpeedyBee"s Mario 8 could be one of the best-designed foldable Long Range frames, especially given its size and build quality.
Designed for long-range FPV flight, this 8" stands out for its extended flight range, stability and portability. The Mario 8 fold is O3 compatible.
Specifications
Wheel..
104.90€
Brez DDV:85.98€
Model: M5V2-ARM-B
Back arm designed for the SpeedyBee Master 5 V2 frame.
Included
1x Back Arm For Master 5 V2
Voir plus..
7.90€
Brez DDV:6.48€
Model: SB-F405WING-MINI
The F405 WING Mini flight controller from SpeedyBee is intended for airplanes as well as FPV quads.
Compatible with most HD and analog VTXs, this FC consists of an STM32F405 processor, an ICM-42688P gyroscope, an SPL006-001 barometer, an AT7456E OSD as well as 6 UARTS.
In addition to supporting INAV..
48.90€
Brez DDV:40.08€
Model: 02AC23
This AIO InfinityAIO FETTec G4 will guarantee reliability and protection for your drone and therefore flight with confidence in any environment.
In addition to its dust and moisture-proof design, the AIO also features FETtec.
It mounts in 30.5*30.5mm and consists of two CNC aluminum heat sinks.
The ..
141.90€
Brez DDV:116.31€
Model: 02AD26
This HummingBird V3 AIO is specially designed for the HummingBird V3.1 BNF drone and is not intended for other assembly projects.
Compatible with the Mark3 camera, this analog AIO from NewBeeDrone is mounted in 25.5*25.5mm and consists of a FC F411, a 12A ESC and a 25mW VTX.
Note : upon receipt ..
60.90€
Brez DDV:49.92€
Model: SB-BLS-55A
The SpeedyBee BLHeli_S 55A 4in1 ESC mounts in 30.5x30.5mm, has a TVS protection diode and supports DSHOT300/600, a voltage of 3-6S and has BLHeli_S J-H-40 firmware.
Specifications
Firmware : BLHeli_S J-H-40
Wireless Configuration : Full Configuration Supported in the SpeedyBee app
Continuous C..
53.90€
Brez DDV:44.18€
Model: SB-F405-V4
The SpeedyBee F405 V4 flight controller mounts in 30.5x30.5mm, configures via Bluetooth and is compatible with the DJI O3 / Runcam Link / Caddx Vista and DJi air unit VTX.
The FC is equipped with an ICM42688P gyro, a USB Type-C port, a barometer and an ATZ456E OSD.
Specifications
MCU : STM32F4..
48.90€
Brez DDV:40.08€
Model: SB-F4V4-55-STACK
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 55A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro.
The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good perfo..
79.90€
Brez DDV:65.49€
Model: *FLOW-2207-2050KV
"The king of new racing motors is here!"
The powerful and resistant NewBeeDrone Flow 2207 2050KV motors are designed for the race.
They have N54 magnets which are more powerful than the N52 and have been designed and tested by the best NewBeeDrone pilots.
Their design directs air downwards, resultin..
95.90€
Brez DDV:78.61€
Model: SB-F4MINI-STACK
New mini stack from SpeedyBee, the F405 mini BLHeli_S 35A.
This stack includes a F405 mini 20x20 flight controller equipped with an 8Mb blackbox, an ICM42688P gyroscope, a barometer, an OSD and supports Bluetooth.
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage..
74.90€
Brez DDV:61.39€
Model: SB-F4V4-60-STACK
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 60A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro.
The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good perfo..
92.90€
Brez DDV:76.15€