![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: Mauch Electronic
Model: MAU2-004
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
64.90€
Brez DDV:53.20€
Blagovna znamka: Mauch Electronic
Model: MAU2-016
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
67.90€
Brez DDV:55.66€
Blagovna znamka: Mauch Electronic
Model: MAU2-002
100A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
54.90€
Brez DDV:45.00€
Model: wkmpmu
Spare Wookong PMU - power unit for wookong...
115.90€
Brez DDV:95.00€
Blagovna znamka: Mauch Electronic
Model: MAU2-088
Mauch Standard Line Customized cable from HS-xxx-xx Sensor Board to Pixhawk / APM
The cable is made of AWG28 silicone wires with original Hirose DF13 connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided..
5.90€
Brez DDV:4.84€
Blagovna znamka: Mauch Electronic
Model: MAU2-043
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with JST-GH 6p connector.
For example:
Pixhawk 3, PixRacer... etc.
L = 150mm ..
7.90€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-052
Input voltage 3-20S, max. 85V !
Power-Cube 2 / V2 with 2 outputs 2x 5.3V / 10A.
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V.
Delivery time for..
240.90€
Brez DDV:197.46€
Blagovna znamka: Mauch Electronic
Model: MAU2-051
Input voltage 3-20S, max. 85V !
Power-Cube 1 / V2 with 1 output 5.3V / 10A.
Scope of delivery:
1x Power-Cube 1 with CFK enclosure and fan.
1x (040) PL sensor cable / L = 150mm
1X (060) Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6p / L = 200mm ..
169.90€
Brez DDV:139.26€
Model: ronp21
Part 21. DJI Ronin Hook and Loop Straps (3pcs)..
9.90€
Brez DDV:8.11€
Blagovna znamka: DJI
Model: lirecoca
The DJI LightBridge operates in the 2.4 Ghz band to transmit live video back to the ground, so the radio controller has to either work through the LightBridge or has to work on another frequency, these radio cables work with Futaba trainer ports found on the Futaba 14SG Radio Combo with R7008SB Rece..
7.90€
Brez DDV:6.48€
