![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: DJI-CARE-AVATA-1
DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..
49.90€
Brez DDV:40.90€
Model: AR0056623
Transport your DJI Avata 2 drone without any hassle with this DJI sling bag.
You can store the DJI Avata 2, the DJI Goggles 3, the DJI RC Motion 3 as well as the charging hub and your batteries there.
Included
1x Sling Bag
Note : Only the bag is included
Voir plus..
83.90€
Brez DDV:68.77€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
62.90€
Brez DDV:51.56€
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
23.90€
Brez DDV:19.59€
Model: POWER1000-BAG
Ideal for transporting, storing and protecting the DJI Power 1000.
The carrying bag has space for all the necessary cabling.
Equipped with air vents and zips, no need to take the DJI Power 100 out to use it!
Specifications
Dimensions: 452 x 240 x 232 mm (L x W x H)
Compatibility: DJI Power 10..
104.90€
Brez DDV:85.98€
Model: DJI-CARE-AVATA2-2A
DJI Care Refresh provides up to 3 replacements over 2 years per for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first rep..
104.90€
Brez DDV:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
126.90€
Brez DDV:104.02€
Model: AR0056876
This adapter was designed by DJI to be able to connect the DJI Mic 2 to Sony cameras without using a 3.5mm TRS cable.
Its design allows it to be installed in the shoe of the Sony device where you can attach the DJI Mic 2 receiver.
As a result, the latter will be connected to the adapter interface an..
37.90€
Brez DDV:31.07€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Brez DDV:11.39€
Model: AR0056467
This 3.5mm TRS audio cable for DJI Mic 2 allows you to remove the receiver from your camera, while leaving it plugged in.
Included
1x Cable
Voir plus..
21.90€
Brez DDV:17.95€
Model: FW19002971
This DJI O3 Air Unit Connection Cable is designed to replace the easily damaged socket cable that connects the two circuit boards during the naked O3 assembly process.
This high quality cable guarantees a perfect fit and reliable connection between boards.
Made of premium quality materials, the cabl..
13.90€
Brez DDV:11.39€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Brez DDV:4.84€