![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: UP-1200+
The most Advanced Charger on the MarketUltra Power UP1200+ 25A UAV/Agricultural Drone Fast Balance Charger/Discharger With Display Screen For 8 Channel 2-6S LiPo LiHV Battery
UP1200+ have a color display screen to clearly show the charging status, the user can well know the charging data, like char..
535.90€
Ex Tax:439.26€
Model: KW-PCB
The Safe 40A Parallel Charge Board allows you to charge four battery packs simultaneously, drastically reducing charge time! The battery packs being charged in parallel need to have the same cell count and be in a similar state of discharge (within 0.2V).That means you can charge four 2-6S 4000mAh o..
27.90€
Ex Tax:22.87€
Model: KW-BP-6S
Low voltage cut-off module for batteries.
Adjustable threshold levels for cut-off and reconnect.
Remote pins for manual override.
Can be used as DC SSR relay.
To protect batteries from over discharge and/or short circuit and overload.
Specifications:
Input voltage range: 6..32V
Continuous current: ..
47.90€
Ex Tax:39.26€
Model: RFD-P-2
Power supply for RFD Series 868, 900, 868x, 900x for Pixhawk 2
If you connect direclty RFD it can burn/spike your Pixhawk cause RFD can draw to much mAmps, so you need to connect it through BEC.
This is 4-6S version plug and play, but we can make it 12S too...
43.90€
Ex Tax:35.98€
Brand: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
94.90€
Ex Tax:77.79€
Model: SK-D250
Ultimate D250 AC/DC Balance Charger/Discharger/Power Supply
250Watt 10AMP
SkyRC D250 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously, the synchronization mode is available, in which users could perform synchronous set..
149.90€
Ex Tax:122.87€
Model: herkIIIu7
Certified for motors U7/KW12 edition
"Herkules III" is the latest generation of Control Electronic for Brushless Direct Current Motors (BLDC).The Design was significantly reworked. More Power, better self-protection and an updated firmware for perfect flight stability.
The speciality of Herkules is ..
1,085.90€
Ex Tax:890.08€
Model: usbcharger
USB Charger Pro - Lipo 2-6s - You must have it, a phone, tablet, ... charger with all information, as voltage, current, charged mAh, ... Specifications - Input voltage range : 7~26v (2s-6s : 1600~5000mAh) - Output current : 0 - 2.6A - Voltage precision : +/- 0.3% , Resolution : 0.01V - Current pre..
41.90€
Ex Tax:34.34€
Brand: Gens Ace / Tattu
Model: 7000
Tattu 70000MAH 22.2V 25C 6S1P LIPO BATTERY PACK
perfect for s900 users with double use.
The best batteries on the world with true C rate.
Only for professional!
Spec.-Product Type:lipo battery pack-Capacity: 7000mAh-Voltage: 22.2V-Max Continuous Discharge: 25C (175A)-Max Burst Discharge: 50C (350A)-..
129.90€
Ex Tax:106.48€
Model: BALANCER-XH-KIT-DIY
Practical and complete, this kit of cables and connectors will allow you to repair your lipo balancing plugs.
This kit contains 10 XH plugs for each type of lipo (6S/5S/4S/3S/2S).
The red and black cables supplied are already pre-crimped to facilitate the creation of your "custom" balancing socket,..
21.90€
Ex Tax:17.95€
Model: XT60-TO-USB
Specifications
Input: 3S-6S
Output power: maximum support 45W
Input voltage: 10.5V-32V
Output voltage: 3V-20V
Output power: maximum 45W
Functions: Input Overvoltage/Undervoltage Protection/Output Overvoltage/Undervoltage/Short Circuit Protection/Overtemperature Protection
Supporting Fast Charging P..
10.90€
Ex Tax:8.93€