![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: STICKER-CONDO-3
Set of 2 special stickers for Panasonic Low ESR 680uF 35V Capacitors.
Also suitable for capacitors 13mm in diameter and 20mm long...
2.90€
Brez DDV:2.38€
Model: STICKER-CONDO-2
Set of 2 special stickers for Panasonic Low ESR 680uF 35V Capacitors.
Also suitable for capacitors 13mm in diameter and 20mm long...
2.90€
Brez DDV:2.38€
Blagovna znamka: Matek
Model: DBUZ5V
The Matek super lightweight and compact Lost Model Beeper is powered by an onboard MCU which enables it to output a louder sound than most 5V active buzzers.
The lost model beeper can be used on traditional PWM receivers or racing flight controllers. Simple and easy to set up, this lost model finder..
6.90€
Brez DDV:5.66€
Blagovna znamka: iFlight
Model: B012912
This BEC module from Iflight offers the possibility of switching from an input voltage of up to 35V to a stable voltage.
It makes it possible to reach an output current of 2A/3A on a wide supply voltage (6 to 35V).
..
10.90€
Brez DDV:8.93€
Blagovna znamka: Matek
Model: MBEC6S
Micro BEC 1.5Amp 5V / 9V from Matek Systems.
Sold by 3pcs
Specifications
High Efficiency Synchronous Step-down regulator
Wide 6V to 3..
10.90€
Brez DDV:8.93€
Blagovna znamka: Matek
Model: BEC12S-PRO
The BEC12S PRO has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 5g, it offers three output voltage options (5.2V/8V/12V)...
23.90€
Brez DDV:19.59€
Blagovna znamka: Mauch Electronic
Model: MAU2-052A
Input voltage 3-20S, max. 85V !
Power-Cube 2 / V2 with 2 outputs 1x 5.3V / 10A + 1X 12V.
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V.
Delivery..
240.90€
Brez DDV:197.46€
Model: tsr12465
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 6,5 V / DC
..
12.90€
Brez DDV:10.57€
Model: tsr12450
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 5 V / DC
Ou..
12.90€
Brez DDV:10.57€
Blagovna znamka: Mauch Electronic
Model: MAU2-016
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
67.90€
Brez DDV:55.66€
Blagovna znamka: Mauch Electronic
Model: MAU2-052
Input voltage 3-20S, max. 85V !
Power-Cube 2 / V2 with 2 outputs 2x 5.3V / 10A.
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V.
Delivery time for..
240.90€
Brez DDV:197.46€