%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: UP-2400-14S-1
UlltraPower balance board for charger UP2400-14S 2X1200W 25A 6-14S LiPo/LiHV Battery UAV Drone Charger
Delivery: 1 piece..
15.49€
Ex Tax:15.49€
Brand: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
188.44€
Ex Tax:188.44€
Brand: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
147.46€
Ex Tax:147.46€
Brand: Gremsy
Model: GR-H16-B
The Gremsy Smart Battery was specially designed for the Gremsy H16/H7. It has a capacity of 3400mAh, a voltage of 14.4V, and a variety of power management functions.
When fully charged, it has a maximum run-time of six hours. Please only charge the Gremsy Smart Battery with Gremsy approved charger..
99.92€
Ex Tax:99.92€
Brand: Gremsy
Model: GR-H16-4S
Gremsy Li-ion Battery (4S - 6800mAh) coming with dual supply connectors powers both H16/H7 and Red / Alexa Mini camera at the same time up to 1 hours.
Gremsy batteries do not have over-discharge protection built-in. It’s recommended to use battery voltage checker to make sure the batteries stay ab..
99.10€
Ex Tax:99.10€
Brand: Mauch Electronic
Model: MAU2-076
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
47.46€
Ex Tax:47.46€
Brand: Mauch Electronic
Model: MAU2-074
100A - Current measurement sensor board, based on Allegro Hall Sensor ACS-100U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
45.00€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
147.46€
Ex Tax:147.46€
Brand: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
61.39€
Ex Tax:61.39€
Brand: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
102.38€
Ex Tax:102.38€
Brand: Gremsy
Model: gr-bat
gPower 4S 3400mAh Battery is used to power the Gremsy H7 & H16. Each battery will run the gimbal for 3-8 hours depending on the particular setup. The battery can be charged using the gPower charger included in the Gremsy gimbal package...
48.28€
Ex Tax:48.28€