![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: BN-CAP-M3X12-SHDR-4PK
Eliminate any arm movement on your Apex frame and improve its strength with this set of 4 M3x12 screws from ImpulseRC.
Included
4x M3x12mm HT Shoulder Bolt Gunmetal
Voir plus..
3.90€
Brez DDV:3.20€
Model: 3S20162
This mount is intended to hold the FX17-B camera on your Mobula6 2024.
Specifications
Weight : ~0.6g
Color : Transparent black
Included
1x Camera mount
2x M1.2*5 screw
Voir plus..
4.90€
Brez DDV:4.02€
Model: FP08259
Canopy intended to protect a 14mm nano camera on the Iflight Alpha A85.
Included
1x 14mm canopy
Voir plus..
7.90€
Brez DDV:6.48€
Model: HP0157.RX-GR-01
Take control of your RS gimbal and elevate your cinematic game with the GR-01 from RadioMaster.
The GR-01 ExpressLRS 2.4G receiver was developed for Cinelifter setups that use the DJI RS2 and RS3 Pro gimbal platforms.
The GR-01 features a sturdy aluminum case and built-in USB-C interface for simple ..
57.90€
Brez DDV:47.46€
Model: PEGASUS-2207-1420KV
The Pegasus are motors designed by ParallaxFPV in collaboration with Rcinpower in order to offer a range of optimized motors meeting the needs and desires of most pilots.
Their bell design designed to best resist repeated crashes and coupled with the know-how and optimization demonstrated by Rcinpow..
26.90€
Brez DDV:22.05€
Model: GP106264
Small but powerful!
The DoMain is the new generation of freestyle FPV drone from GEPRC.
This DeadCat 4.2" drone has a unique conception that increases the stability of the frame and its creative design on the side plates gives it an originality that others do not have.
Specifications
Wheelbase：..
68.90€
Brez DDV:56.48€
Model: TBSSOURCEV5-ARM7
DeadCat 7" arms for the TBS Source One 7" V5 frame.
Included
2 x TBS Source One V5 7inch front arms
2 x TBS Source One V5 7inch rear arms
Voir plus..
20.90€
Brez DDV:17.13€
Model: SB-F405WING-MINI
The F405 WING Mini flight controller from SpeedyBee is intended for airplanes as well as FPV quads.
Compatible with most HD and analog VTXs, this FC consists of an STM32F405 processor, an ICM-42688P gyroscope, an SPL006-001 barometer, an AT7456E OSD as well as 6 UARTS.
In addition to supporting INAV..
48.90€
Brez DDV:40.08€
Model: VCI-2306-1950KV
Discover Vulcan Innovation and its racing motors, the 24K 2306.
This 24K version in 1950KV is ideal for freestyle, it guarantees smoother operation and higher efficiency providing an immersive flight experience.
The VCI 2306 have an M5 nut shaft and will be perfect associated with Gemfan 51466 three..
21.90€
Brez DDV:17.95€
Model: CAN-G474
Matek"s CAN-G474 is a Node adapter based on ArduPilot AP-Periph firmware.
With this board, you will be able to more easily use ArduPilot to convert GNSS, Compass, barometers, airspeed sensor, PWM and buzzer devices to DroneCAN devices.
CAN-G474 has STM32G474 chip and 5Mbit/s transceiver.
Spec..
24.90€
Brez DDV:20.41€
Model: SKY-150725-HD4
The SkyStars F405 HD4 + KO55 Blheli_S Fly Tower Stack features the SkyStars F4 flight controller, as well as the KO55 55A 4-in-1 ESC to give your multirotor full power!
Specification FC
MCU: STM32F405
IMU: ICM42688P
OSD: OSD AT7456E
6 UARTs (UART1,2,3,4,5,6)
Blackbox: 16 MB
WS2812 Led Strip: Y..
91.90€
Brez DDV:75.33€
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
18.90€
Brez DDV:15.49€