Search Criteria
Products meeting the search criteria
Model: 20263
This Holybro stack consists of a Kakute F722 flight controller and a Tekko32 F4 50A 4in1 ESC.
Compatible with both digital and analog VTX, the Kakute F722 Tekko32 F4 50A has an ICM42688P gyro, built-in OSD, 16MB blackbox, LED port and can support up to 8S voltage while providing a stable output of 9..
95.82€
Ex Tax:95.82€
Model: 20265
This Holybro stack consists of a Kakute F722 flight controller and a Tekko32 F4 Metal 65A 4in1 ESC.
Compatible with both digital and analog VTX, the Kakute F722 Tekko32 F4 Metal 65A has a built-in OSD, 16MB blackbox, LED port and can support up to 8S voltage while providing a stable output of 9V/3A ..
129.43€
Ex Tax:129.43€
Model: LUCID-PRO-F60A-AM32
Here is the latest stack made by Team BlackSheep, the Lucid Pro F60A AM32 designed for racing and freestyle.
It consists of an F435 flight controller equipped with an AT32F435RMT7 processor, an MPU6000 gyro, an 8Mb blackbox, an AT7456E OSD, a double BEC as well as 6 UARTS. The 60A ESC is based on AM..
80.25€
Ex Tax:80.25€
Model: LUCID-FREESTYLE-F60A-AM32
Here is the latest stack made by Team BlackSheep, the Lucid Freestyle F60A AM32 designed for racing and freestyle.
It consists of an F435 flight controller equipped with an AT32F435RMT7 processor, an ICM42688P gyro, an 8Mb blackbox, an AT7456E OSD, a double BEC as well as 6 UARTS. The 60A ESC is bas..
91.72€
Ex Tax:91.72€
Model: UNIFY-PRO32-DP-MMCX
The TBS Unify Pro32 DP analog video transmitter is an extremely lightweight, high-quality 3W VTX.
With a frequency range from 4990MHz to 6030MHz, it consists of an MMCX connector, is compatible with 2-6S voltage and the OSD is configured using TBS Smart Audio 2.1 screw Betaflight, TBS Crossfire / Tr..
53.20€
Ex Tax:53.20€
Model: UNIFY-PRO32-DP-HEATSINK
Heat sink for the VTX TBS Unify Pro32 DP.
Included
1x Heatsink
Note : VTX not included
Voir plus..
3.20€
Ex Tax:3.20€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
85.16€
Ex Tax:85.16€
Model: 0110003152
This Runcam Nano 6 analog camera with a 32Bit 400mW VTX are intended for the Tinyhawk III Plus from Emax.
* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV..
31.89€
Ex Tax:31.89€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
51.56€
Ex Tax:51.56€
Model: SKY-150757
The MVP60A 4in1 ESC supports BLHeli_32 and 3-6S voltage.
Specifications
Input voltage: 3-6S LiPo
Con.Current: 60A
Peak Current: 80A≥ 10S
Firmware: BLHeli_32
Support: Dshot 600/1200
Mounting hole : 20X20 mm/M3
BEC: No
Product size: 35.8*47*6.5mm
Weight: 17g
Included
1x MVP60A 4in1 ESC
1..
64.67€
Ex Tax:64.67€
Model: SKY-150754
The KM65A BL32 128k 3-6S 4in1 ESC is a powerful ESC for freestyle and long range drones from 5 to 8".
It supports 3-6S voltage, current up to 65A, telemetry, BLHeli_32, bidirectional DShot and PWM frequency up to 128KHz.
Featuring an aluminum heatsink, the KM65 can be connected to the flight control..
67.13€
Ex Tax:67.13€
Model: TMOTOR-V50A-ESC-4EN1-SE
The Velox 50A SE 4in1 ESC from T-Motor will guarantee you the performance you are looking for, whether in freestyle, cinematic or long range.
The Velox V50A 32Bit supports 3-6S voltage and measuring 30.5*30.5mm is perfectly suitable for Velox V3 motors.
Specifications
Current : 50A
Peak current..
63.85€
Ex Tax:63.85€