![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: FW19002978
Flywoo"s next generation F722 PRO Mini V2 flight controller not only offers a high-performance 20x20mm STM32F722 main chip, but it also supports 8 motor outputs.
Combined with the GOKU G45M 4in1 ESC, it forms a high-performance mini stack equipped with an ICM42688 gyro, a 16MB blackbox or even a 10V..
81.90€
Brez DDV:67.13€
Model: GP106088
GEPRC"s AIO TAKER G4 35A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 35A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
67.90€
Brez DDV:55.66€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
66.90€
Brez DDV:54.84€
Model: GTSV3-1303-11500KV
The GTS V3 1303 in 11500KV from Rcinpower is a powerful race motor intended for Cinewhoops / Toothpicks from 2 to 3".
Specifications
KV: 11500
Configuration : 12N14P
Stator diameter : 13mm
Stator Length : 3.2mm
Shaft diameter : 1.5mm
Dimensions : 16.5*10.1mm (dia)
Weight : ~5.6g (with wire)
Id..
15.90€
Brez DDV:13.03€
Model: JH61299
The Reactor 66 ESC supports 4-6S voltage and DSHOT300/600/1200.
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 66A × 4
Burst: 105A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_66
Soft : DSHOT300/600/1200
PWM : 24~128k
Mounting : 20x20mm, M2/M3
Included
1x..
67.90€
Brez DDV:55.66€
Model: JH61608
The Reactor 44 ESC supports 4-6S voltage and DSHOT300/600/1200/MAX2400 (FETTEC).
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 44A × 4
Burst: 54A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_44
Soft : DSHOT300/600/1200/MAX2400 (FETTEC)
PWM : 24~128k
Mounting :..
62.90€
Brez DDV:51.56€
Model: BF14874
FC Specifications
MCU: AT32F435CGU7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLI..
84.90€
Brez DDV:69.59€
Model: MOUSSE-GOGGLES2-V3--1
V3 replacement foam for the DJI Goggles 2 and DJI Integra goggles.
This format includes an increased height of the sponge on both sides eliminating the problem of light leakage.
The high compressibility of the foam ensures an optimal distance between the lens and the eyes.
Finally, the ergonomic sha..
14.90€
Brez DDV:12.21€
Model: HDZ3213
The HDZero Nano V3 Camera is optimized for a 4:3 aspect ratio but can be configured to 16:9 in the settings.
It"s small and lightweight, making it ideal for whoops and micro drones. Its lens and wide FOV provide the best nano camera image quality for HDZero.
This third version replaces the nano V2 a..
64.90€
Brez DDV:53.20€
Model: HDZ3204
The HDZero Micro Camera V3 is optimized for a 16:9 aspect ratio to match the HDZero goggles screen, this provides the largest and sharpest image for the HDZero system.
A large lens also provides superior sharpness and contrast, reduced fish-eye effect and excellent low-light performance.
You have th..
64.90€
Brez DDV:53.20€
Model: ROBIN3
The Robin 3 camera from Runcam is a micro analog camera, it has a 150° field of view, 1200TVL resolution and a 1/3" sensor.
Specifications
Image Sensor : 1/3" CMOS Sensor
Horizontal Resolution : 1200TVL
Lens : FOV D:150° H:120° V:87°
Screen Format : 4:3
Mirror/Flip : Available
Signal System : N..
18.90€
Brez DDV:15.49€
Model: CB-OS-8-16-32
These professional grade ND filters are designed for the DJI Osmo Action 4.
They screw on and off without tools, replacing the Action 4"s clear lens coating while maintaining the waterproof seal.
Extremely durable, the ND8/16/32 filters are made from Corning Gorilla Glass and anodized aluminum, maki..
46.90€
Brez DDV:38.44€