%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: AR0056916
DJI certified, this 120W solar panel from Zignes is intended to recharge the DJI Power 1000 station.
Benefit from a max charging power of 120W, an open circuit voltage of up to 26V and a short circuit current of 7A max.
Its IP65 certification notes its dust and water resistance. In addition, the sol..
258.11€
Ex Tax:258.11€
Model: MULTITOOL-NINJA
This tool will allow you to test your LiPos from 1S to 12S as well as your servos if you are a fan of flying wings.
The tester is equipped with two plugs for servos (1 input / 1 output), pins for balance plugs for your LiPo batteries, a wheel for scrolling through the menu and a color screen.
This m..
17.95€
Ex Tax:17.95€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
85.16€
Ex Tax:85.16€
Model: R29-GR-PC
HQProp R29 propellers are of very good quality and allow very good performance. Durable Polycarbonate version.
Specifications
Propeller Diameter: 5.1"
Pitch : 2.9
Blades : 3
Material : Poly Carbonate
Weight : 4.4g
Hub Diameter : 13.3mm
Hub Thickness: 6.3mm
S..
3.20€
Ex Tax:3.20€
Model: HERO-UNIV-BICOLOR-FREESTY-TPUBYDFR
Universal mount for GoPro Hero 9-12 made of TPU.
Specifications
Simple to install
TPU flexible material improving durability and protection
Compatibility : GoPro Hero 9-12
Weight: ~29g
Included
1x TPU mount
Voir plus..
22.05€
Ex Tax:22.05€
Model: GOPRO-9-12-RENFO-UNIV-TPUBYDFR
This GoPro Hero 9/10/11 and 12 compatible TPU mount is designed to best protect your camera thanks to the reinforcements at the corners of the support.
A double wall with an intermediate structure helps absorb possible shocks.
This mount is compatible with all standard GoPro mounts.
Specification..
26.97€
Ex Tax:26.97€
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
19.59€
Ex Tax:19.59€
Model: PIRAT-SHORTY-GP9-12-25D
25° support for Gopro Hero 9 to 12 intended for the Piratframes Shorty frame.
Specifications
Material : TPU
Easy to install
Weight : ~19.2g
Included
1x TPU mount
Voir plus..
14.67€
Ex Tax:14.67€
Model: PIRAT-PUNCH-GP9-12-25D
25° support for Gopro Hero 9 to 12 intended for the Piratframes Punch frame.
Specifications
Material : TPU
Easy to install
Weight : ~20g
Included
1x TPU mount
Voir plus..
14.67€
Ex Tax:14.67€
Model: VALKYRIE-CONDO-TPUBYDFR
Capacitor mount for the Valkyrie 5.1" and the Valkyrie Mini 3.5" from ParallaxFPV.
Only compatible with 12.5mm wide capacitors.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie 5.1" / Valkyrie Mini 3.5"
Weight : ~1.4g
Included
1x TPU mount
Voir plus..
2.38€
Ex Tax:2.38€
Model: BN-CAP-M3X12-SHDR-4PK
Eliminate any arm movement on your Apex frame and improve its strength with this set of 4 M3x12 screws from ImpulseRC.
Included
4x M3x12mm HT Shoulder Bolt Gunmetal
Voir plus..
3.20€
Ex Tax:3.20€
Model: X-FW080012-E1D1-01
This Flycolor single ESC has aluminum heat sinks, multiple protections (current, temperature etc...) and supports all Dshot and Proshot protocols.
Equipped with the ARM 32-bit Cortex MCU, the X Cross 80A supports frequency up to 64MHz, which is 25% higher than the previous generation MCU.
Specif..
71.23€
Ex Tax:71.23€