![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Blagovna znamka: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
77.79€
Brez DDV:77.79€
Blagovna znamka: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
147.46€
Brez DDV:147.46€
Blagovna znamka: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
61.39€
Brez DDV:61.39€
Blagovna znamka: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
102.38€
Brez DDV:102.38€
Ni na zalogi
Model: rpmax-bec
A versatile device that converts a high input voltage from say a flight battery into a selectable (3 setting), stable output voltage and a maximum of 5A current. Useful for all types of model but particularly multi-rotors. Whether it powers the reciever, lights or other auxilliaries the choice is yo..
25.33€
Brez DDV:25.33€
Ni na zalogi
Model: XH254-TYPEC-5V
Save space and weight by replacing the battery with this SpeedyBee BEC.
Power your HD camera with the supplied JST1.25 connectors.
This BEC is compatible with GoPros 6/7/8/9/10 and 11, Runcam Thumb, Thumb Pro and DJI Action3.
Note: GoPro Hero 10/11 recordings without battery require labs version fi..
11.39€
Brez DDV:11.39€
Blagovna znamka: iFlight
Model: B012912
This BEC module from Iflight offers the possibility of switching from an input voltage of up to 35V to a stable voltage.
It makes it possible to reach an output current of 2A/3A on a wide supply voltage (6 to 35V).
..
8.93€
Brez DDV:8.93€
Blagovna znamka: TBS
Model: TINYSLEDS-MINI
Set of 4 RGB minis LED from TeamBlackSheep.
Bullet points
These are integrated Racewire and Racelites.
These can be installed in any ..
8.11€
Brez DDV:8.11€
Ni na zalogi
Model: SKY-150714
This Skystars kit consists of 4 bars each equipped with 4 2812 RGB LEDs.
These race wire LEDs have two functions:
- Race wire only (motor supply via external pads).
- LED by adding three other wires (inner pads) to power and assign the LED colors.
You can use Race wire alone or Race wire + LED.
..
8.93€
Brez DDV:8.93€
Blagovna znamka: TBS
Model: TINYSLEDS-FULL
Set of 4 RGB LED from TeamBlackSheep.
Bullet points
Racelites brightness changes with throttle input. These are not constant on full ..
8.11€
Brez DDV:8.11€
Model: MENACE-COBLED
CobLED for the MenaceRC CobDRIVER.
Perfect for racing vision and freestyle, the CobDRIVER V2 from MenaceRC converts the power of your battery model into the power needed for the LEDs. This led controller can be configured from 2 to 8 leds depending on the light you want.
..
5.66€
Brez DDV:5.66€
Blagovna znamka: Matek
Model: MBEC6S
Micro BEC 1.5Amp 5V / 9V from Matek Systems.
Sold by 3pcs
Specifications
High Efficiency Synchronous Step-down regulator
Wide 6V to 3..
8.93€
Brez DDV:8.93€