Model: 3k-plate-5mm
3K Carbon plate 5mm (special for FPV racers) unbreakable
Mate finish.Features:Carbon fiber: high in strength and modulus, chemically stable, resistant to acids, bases, and solvents, with a small coefficient of linear expansion, good dimensional stability, high strength to weight ratio, harmonic da..
149.92€
Brez DDV:149.92€
Model: KW-CAR-T20
Top Quality Carbon 3K tubes 550mm / 20mm. Matt finish.Features:Carbon fiber high in strength and modulus, chemically stable, resistant to acids, bases, and solvents, with a small coefficient of linear expansion, good dimensional stability, high strength to weight ratio, harmonic dampening characteri..
24.51€
Brez DDV:24.51€
Model: sjdualbat
Droidworx Skyjib 8 "Double Up" Dual Battery Mount v2
With these plates, a pair of large LiPo batteries (i.e. Nanotech, MaxAmps, Zippy, etc.) can be mounted on the heavy-lift Skyjib 8. This will allow for a longer flight time when carrying large cameras like the RED Epic and Canon C300. You will al..
139.26€
Brez DDV:139.26€
Model: cgak
Cinestar Gimbal "Up Armor Kit" Accessory Mounting SystemThe Cinestar Gimbal from Freefly Systems does not provide any surfaces or holes for mounting the necessary accessories needed to actually operate the gimbal. So instead you are forced to resort to zipties and servo tape. For the professionals..
58.11€
Brez DDV:58.11€
Model: cinefbp
Cinestar Gimbal "Up Armor Kit" Accessory Mounting SystemAll camera gimbals work best when they are fully balanced, and the excellent Cinestar Gimbal is no exception. This forward mounted battery tray allows you to run large 3S lipo batteries ahead of the mounting point helping to balance the CG of ..
37.62€
Brez DDV:37.62€
Model: av200armk
AV200 "Up Armor Kit" Accessory Mounting SystemThe AV200 Gimbal from Photohigher does not provide any surfaces or holes for mounting the accessories needed to operate the gimbal. This "Up Armor" kit provides a place to mount your stabilizer board, battery, video transmitter, BEC, and radio receiver ..
66.31€
Brez DDV:66.31€
Model: av200qrcin
AV200 Quick Release Anti-Vibration MountCombining the best features of the 3-axis Photohigher AV200 gimbal, the Cinestar anti-vibration isolators, and the quick release rail system, this adapter plate does it all! This carbon fiber adapter plate mounts the AV200 gimbal to the Droidworx Skyjib using..
278.61€ (Od 13.59€ mesečno)
Brez DDV:278.61€
Model: cfk1245r
Light and stiff propeller pair made from CFK (handmade)Perfectly balanced and with polished surface.
Â
Technical data
Diameter: 12" (30,48cm)
Slope: 4,5" (11,4cm)
Bore: 5mm
Weight: approx. 11g
Delivery
1x Pair
You can order them separatly under notes...
65.49€
Brez DDV:65.49€
Model: cfk1238r
Light and stiff propeller pair made from CFK (handmade)Perfectly balanced and with polished surface.
Technical data
Diameter: 12" (30,48cm)
Slope: 3,8"
Bore: 5mm
Weight: approx. 11g
Delivery
1x Pair
You can order them separatly under notes...
65.49€
Brez DDV:65.49€
Model: FF-MXL-450
Ultra rigid 19mm x 450mm Carbon Lens Rod ensures that your camera and lens combination is as stiff as possible. Stabilizers perform the best when the camera and lens are rigidly mounted and move as one solid unit with no play of slop. Our 19mm carbon rods are a optimal mixture of lightweight and r..
80.25€
Brez DDV:80.25€
Model: FF-MXL-300
Ultra rigid 19mm x 300mm Carbon Lens Rod ensures that your camera and lens combination is as stiff as possible. Stabilizers perform the best when the camera and lens are rigidly mounted and move as one solid unit with no play of slop. Our 19mm carbon rods are a optimal mixture of lightweight and r..
62.21€
Brez DDV:62.21€
Model: 3kcarbontub30m
Top Quality Carbon 3K tubes 550mm / 1mm.Matt finish.Features:Carbon fiber: high in strength and modulus, chemically stable, resistant to acids, bases, and solvents, with a small coefficient of linear expansion, good dimensional stability, high strength to weight ratio, harmonic dampening character..
29.43€
Brez DDV:29.43€