%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Blagovna znamka: TBS
Model: tbsts
Shield the TBS CORE from any RF-noise that may appear from ESCs or other noisy equipment on board. Also shields the UHF receiver from interference from the TBS CORE. A neat little add-on for the long-range afficionados!..
9.75€
Brez DDV:9.75€
Model: ledflexye
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.02€
Brez DDV:4.02€
Model: ledflexgr
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.02€
Brez DDV:4.02€
Model: clipc
Scope of Delivery 4 pieces.I in order specify for which motor u want them:KW2, 4, 8, 10..
3.20€
Brez DDV:3.20€
Top Brand
Blagovna znamka: TBS
Model: tbslove
TBS Loveseat (antivibration)
Fight vibrations by placing your GoPro Camera on the TBS Loveseat. Fits the front lip perfectly, cushions your GoPro and thus fights vibrations. Made from memory foam, same material that ear plugs are made out of, which has been known since day one to be a good vibra..
7.30€
Brez DDV:7.30€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
9.75€
Brez DDV:9.75€
Model: ledflexrt
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"s ..
4.02€
Brez DDV:4.02€
Model: laver
Laver 30mm - M3aluminium 6061-T6 (anodized) Size : 30mm One pair weight: 3.1g..
8.11€
Brez DDV:8.11€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
30.25€
Brez DDV:30.25€
Model: mitn6mm3538
MK propeller mount with 6mm hub (M6 winding). Suitable for MK3538.Mounted is the propeller with a 6mm nut and a tooth washer (see pictures).
Delivery
1 propeller mount M6 and additional mounting material (see photo)..
7.30€
Brez DDV:7.30€
Model: wnkeladapter
With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter and/or larger mass in the outer regions.
delivery
2 adapters and screws for motor mounting...
6.48€
Brez DDV:6.48€
Model: mkusb
MKUSB: USB adapter kit for the MikroKopter (SMD preassembled)This adapter converts USB to serial.It has 2x 10pin connector for direct connection to FlightCtrl, NaviCtrl, MK3Mag or BL-Ctrl.By placing a jumper, the target board can be supplied with 5V if needed.With the MK-USB you can program all cont..
15.49€
Brez DDV:15.49€