Model: nazav2p
Naza V2 Phantom edition..
35.16€
Brez DDV:35.16€
Blagovna znamka: T-Motor
Model: u7propadaptccw
NEW unbreakable and the best prop adapter for KW12 / U7 motors, this adapter will not let you down on the field.
6mm shaft.
delivery 1 piece CCW..
6.48€
Brez DDV:6.48€
Blagovna znamka: T-Motor
Model: u7propadapt
NEW unbreakable and 6mm longer prop adapter for U7 / KW12 motors, this adapter will not let you down on the field. 6mm shaft. Now it fits to all wooden/plastic props.
You can buy this prop adapters only at Kopterworx, exclusive from T-motor.
delivery 1 pair:1x CW + 1x CCW..
12.21€
Brez DDV:12.21€
Blagovna znamka: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
20.41€
Brez DDV:20.41€
Model: kw12motor25
Motor mount for single or coaxial setup for KW12 motors to fit on 25mm booms or cinestars.Made from 3K carbon 2,5mm.
Delivery:2 pieces (top-bottom motor)8 piecs hexa 8mm screws for motor..
16.31€
Brez DDV:16.31€
Model: herkspark
This board elimininate sparks when u connect Herkules board III to lipos...
24.51€
Brez DDV:24.51€
Model: alex35
..
70.41€
Brez DDV:70.41€
Model: laver40
Laver 20mm - M4aluminium 6061-T6 (anodized) Size : 20mm One pair weight: 3.1g..
8.11€
Brez DDV:8.11€
Model: relyswitch1
A nice little relay switch controlled by a spare auxiliary channel on your receiver.
Ideal for switching lights, sound and any other auxiliary electrical items.Spec:Dimensions: 31x18.5x16.3mmRX lead leingth:230mmPower in/out lead leingth:40mm (each)Max switching load (DC):2AMax Voltage (DC):30VMax s..
8.11€
Brez DDV:8.11€
Model: elecswitch4c
This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and ..
10.57€
Brez DDV:10.57€
Model: redboard
This is Redundancy board for DJI and Pixhawk system with:
1. A3-A22. A2-WKM3. A2-Naza v24. WKM - WKM5. WKM - Naza v26. Pixhawk series - Pixhawk series7. DJI - Pixhawk series
You can manually switch between 2 controlers or if something fails on the electronic the board will switch automatic to second..
899.92€ (Od 23.94€ mesečno)
Brez DDV:899.92€
Model: 5to12v
5v - 12v Stepup
Clean power to drive 12v cameras
Provides clean power to drive 12v cameras from the 5v outputs of ImmersionRC A/V transmitters. Efficient step-up regulator, with almost no RF emissions. With 250mA max. output current, most typical FPV cameras can be powered.
5v-12v Input Voltage
250..
15.49€
Brez DDV:15.49€