![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Blagovna znamka: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
24.90€
Brez DDV:20.41€
Blagovna znamka: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Brez DDV:4.84€
Blagovna znamka: Mauch Electronic
Model: MAU2-089
Mauch Standard Line Customized cable from Sensor Hub X2 to HS-xxx-xx Sensor Board
The cable is made of AWG28 silicone wires with original Hirose DF13 connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided..
4.90€
Brez DDV:4.02€
Blagovna znamka: Mauch Electronic
Model: MAU2-064
Mauch 064 - Power-Cube - V2 / HS-xxx-xx / Sensor Cable / DF13-6p / L = 200mm
Lenght: 200mm..
6.90€
Brez DDV:5.66€
Blagovna znamka: Mauch Electronic
Model: MAU2-065
Mauch 065 - Power Cube output cable JST-GH..
8.90€
Brez DDV:7.30€