Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Take it. Easy.Weighing less than 249 g, [1] Mini 4 Pro was designed for life on the go. There's no need for training or examinations in most countries..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
Discover YMZFPV freestyle drones with the 2" analog Lighting1.
This original designed drone is ready to fly, the BNF is composed of a 400mW analog VT..
Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
This product has been verified to be delivered safely in its original packaging, box or bag, reducing unnecessary packaging. For purchases over EUR 50, we offer the option of FREE delivery to your home!
The T8 Pro features high precision quad ball bearing HALL sensor gimbals and CNC aluminum switch nuts with matching CNC machined aluminum gimbal face plates for a touch of class.
Like to spend time playing simulators when you cannot get out to fly? The T8 Pro has USB-C Simulator support too! Play your favorite sims with the supplied USB cable, no special adapters needed. The T8 Pro has full OpenTX sound and script support by simply adding an SD card in the SD card slot with OpenTX SD contents.
Featuring a built in 1000mah battery for up to 6 hours of operation on a single charge and built in USB charging to make topping up the battery easy and convenient. Its compact size and ergonomic design with fold away finger rests, make it the ideal travel or whoop companion.
The T8 Pro is compatible with all CC2500 protocols supported by the Multi-Module project such as Frsky D8, D16, Futaba S-FHSS, RadioLink, Graupner HoTT and more! Just select the right protocol via the menu system with the included clip on OpenTX screen control unit and fully customize your model configuration with the full capability of OpenTX at your fingertips.
The T8 Pro is our most compact fully OpenTX supported radio yet! Based on the T8 Design the T8 Pro unlocks the power of OpenTX Firmware programmability, Companion PC software and firmware updates. With 16 channels, built in battery and Multi-Module powered C2500 RF chip the T8 Pro is ready to command your favorite models right after the first charge!
Alta X in Box (RTK gps) new more powerfull version with X9 motors
We designed Alta X from the ground up to capitalize on the benefits of large, effici..
The APD F-Series ESCs bring forward a ground-breaking new design utilising a Powerful 32bit F3 running brand-new firmware developed from the ground up..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.
When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:
Company name
The exact address of the company
tax number
Mandatory phone number (delivery service)
Choose a payment method:
In summary
TRR
Paypal
Leanpay
At the very end, carefully read the information about your order and confirm your choice.
The package will arrive at your address within 1-3 working days.
Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.
You can choose between three payment methods:
Via the online bank or according to the estimate
PayPal*
Cash on delivery
Lean pay
If the value of the package is less than €50, delivery within Slovenia via the delivery service is €4.90. For purchases over €50, delivery within Slovenia is free.
The delivery amount is calculated at the end of the purchase.
Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.
If you want to go through the return process, we kindly ask you to fill out the form here.
If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.
If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.
After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.
The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.
Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.
Yes, you can visit our store, where we will be happy to help you and present the product.
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
![APD Esc 200F3[X] 14S 60V 200A](https://www.onedrone.com/store/image/cache/catalog/produkti/APD-200-F3/apd_f-series_200f3_x_14s_60v_200a-190x190w.jpg "APD Esc 200F3[X] 14S 60V 200A")
