%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Matek
Model: 3901-L0X
Matek System Optical Flow Lidar Sensor 3901-L0X Module Support INAV for RC Drone
Specifications
Optical Flow: PMW3901
Lidar: VL53L0X
Interface UART
Protocol: INAV MSP
Working Range: 8cm~20..
31.07€
Ex Tax:31.07€
Model: DA16
New VTX 5.8GHz transmitter from RushFPV with 48 channels and three adjustable levels of transmit power: PIT/25/100/200mW.
Specification..
26.97€
Ex Tax:26.97€
Model: OPENLAGER
This component is an external blackbox.
Refine the tune of your favorite machine that is not equipped with an original blackbox.
The module is easily connected using three 5V pads, GND and RX (to be connected to a free TX of your FC).
..
22.05€
Ex Tax:22.05€
Brand: Matek
Model: HCS-150A
This Matek current sensor helps prevent voltage and heat drops on components. It has an operating temperature ranging from -30 to 80°C and has a continuous current rating of up to 150A.
..
17.95€
Ex Tax:17.95€
Model: VIFLY-GPS-MATE
Discover the Vifly GPS-mate, an autonomous power supply for your racer"s GPS chip.
Wiring diagrams:
GPS without compass (Plug):
In this case, just plug in the cable and connect it.
GPS with compass:
With compass, you have to solder the cable via the PAD at the back.
..
14.67€
Ex Tax:14.67€
Brand: T-Motor
Model: F60PROV-LV-BELL
Spare bell for replacements or to upgrade your F60 PRO V Light Version motors.
Included
1x Bell For F60 PRO V Light Version Motor
..
14.67€
Ex Tax:14.67€
Model: BLACKBIRD-BELL-V3
Spare bell for replacements or to upgrade your Blackbird V3 motors.
Included
1x Bell For Blackbird V3 Motor
..
14.67€
Ex Tax:14.67€
Brand: T-Motor
Model: F60PROV-BELL
Spare bell for replacements or to upgrade your F60 PRO V motors.
Included
1x Bell For F60 PRO V Motor
..
13.85€
Ex Tax:13.85€
Brand: TBS
Model: TBS-RACE-WIRE
Race Wire is the perfect upgrade for your freestyle or race Quad. It simply replaces a section of your motor wires under the propeller tips, making your quad protected against propeller shocks.
..
11.39€
Ex Tax:11.39€
Brand: Flywoo
Model: BQ01
This is the Flywoo BQNANO V1.0.
If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad.
Specifications
Baro..
11.39€
Ex Tax:11.39€
Brand: Matek
Model: CRSF-PWM-C
Compatible with the CRSF Protocol only, this converter allows you to convert your Crossfire receiver to PWM protocol.
Featuring 6 PWM outputs with a frequency between 50-400Hz, 2x uarts for Receiver and GPS, compatibility with external current sensors and an upgradeable firmware, this PWM converter ..
11.39€
Ex Tax:11.39€