Menu
Your Cart

Power Supply

Mauch Power Cube 2 / v3 (1x5V 1x12V)
Out of stock
Brand: Mauch Electronic Model: MAU2-052A
Input voltage 3-20S, max. 85V !  Power-Cube 2 / V2 with 2 outputs 1x 5.3V / 10A + 1X 12V. REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V. Delivery..
240.90€
Ex Tax:197.46€
Model: hexartf
Hexa power board Plug and play RTF. No more problems with soldering, bad contacts and IC2 problems. - industrial soldered - preconfigured- tested- extra special cooling- DC converter 12V for powering video transmiter, ...- power cable for LIPO- added 3x low impendance elko 330/25- plug and play..
462.90€
Ex Tax:379.43€
Brand: Mauch Electronic Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).  Input and output is protected by Panasonic FC / FM capacitors. Input 4-14S LiPo / max. 60V . ..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage). Input and output is protected by Panasonic FC / FM capacitors. Input 4-14S LiPo / max. 60V. Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic Model: MAU2-083
Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes. 20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Model: gryphon6
Power Distribution Board 6 with dual bec for most advanced users. For HEXA Multicopter (Equipped with 12 pair of 3.5mm plug) SPECIFICATIONS - Up to 6 ESC/Motor can be connect to the Board - 260A (Continuous), 320A (Peak) - 2 layout with 2oz(70um) Copper Dual PCB. - Gold plated with black soldermask ..
72.90€
Ex Tax:59.75€
Brand: Mauch Electronic Model: MAU2-016
Input 2-6S LiPo / max. 28V. Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as ..
67.90€
Ex Tax:55.66€
Brand: Mauch Electronic Model: MAU2-052
Input voltage 3-20S, max. 85V !  Power-Cube 2 / V2 with 2 outputs 2x 5.3V / 10A. REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V. Delivery time for..
240.90€
Ex Tax:197.46€
Brand: Mauch Electronic Model: MAU2-051
Input voltage 3-20S, max. 85V !  Power-Cube 1 / V2 with 1 output 5.3V / 10A. Scope of delivery: 1x Power-Cube 1 with CFK enclosure and fan.  1x (040) PL sensor cable / L = 150mm 1X (060) Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6p / L = 200mm ..
169.90€
Ex Tax:139.26€
Showing 13 to 21 of 21 (2 Pages)