![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: cinefbp
Cinestar Gimbal "Up Armor Kit" Accessory Mounting SystemAll camera gimbals work best when they are fully balanced, and the excellent Cinestar Gimbal is no exception. This forward mounted battery tray allows you to run large 3S lipo batteries ahead of the mounting point helping to balance the CG of ..
45.90€
Ex Tax:37.62€
Model: bampc
Boom Accessory Mount Plate for Cinestar 25mm
This carbon fiber plate and clamp allows you to to mount nearly anything to your 20mm or 25mm booms. Mount batteries, GPS or radio receivers, video transmitters, etc. anywhere along any of the booms on the Skyjib or Cinestar. A much more professional an..
34.90€
Ex Tax:28.61€
Model: av200quickr
Photohigher AV200 Gimbal Quick Release
This hard mount adapter plate with quick release allows the Photohigher 3-axis AV200 gimbal to mount to the Droidworx Skyjib v1. Attach or remove the entire camera assembly in about 10 seconds without tools! This kit is intended for lighter camera payloads an..
239.90€
Ex Tax:196.64€
Model: cs8plate3mmhe
Cinestar 8 Gimbal stronger 3mm Plate for cameras like Epic, Scarlet, C300, ....Cinestar 8 compatible gimbal mounting plate. This thicker and slightly stronger 3mm carbon fiber plate attaches to the 360 pulley and the vibration isolation on the 3-axis Cinestar Gimbal.For payloar 3-4kg The best for e..
69.90€
Ex Tax:57.30€
Model: cs8plate3mm
Cinestar 8 Gimbal stronger 3mm Plate Cinestar 8 compatible gimbal mounting plate. This thicker and slightly stronger 3mm carbon fiber plate attaches to the 360 pulley and the vibration isolation on the 3-axis Cinestar Gimbal...
49.90€
Ex Tax:40.90€
Model: 32mmrods
One pair of 32mm x 15mm Vertical Rods for the O Shock mount. Four rods required per full set.
INCLUDES:
Two 32mm x 15mm Carbon Fiber Rods
Mounting Hardware..
39.90€
Ex Tax:32.70€
Model: FF-MP-MS
Selection of screws for mounting MōVI (Pro or XL) camera plates/rails to a variety of cameras.
Specs:
Stainless Steel
Flat Head Screws and Socket Head Cap Screws
Includes:
Qty 8 - Bolt M4 x 10 SHCS
Qty 4 - Bolt ¼-20 x ½" SHCS
Qty 2 - Bolt ¼-20 x ½" FHCS
Qty 2 - Bolt ¼-20 x ⅜" FHCS
Qty 2 - Bolt ⅜-..
10.90€
Ex Tax:8.93€
Model: FF-MOVI-PC
An affordable case for everyone who loves to use their camera phone. Its thin, durable, rubberized body protects your phone from parking lot drops, tree branch scratches, and the occasional “I drank too much; where’d I leave my phone?” nights out.
Available in black canvas, the back of the case prov..
43.90€
Ex Tax:35.98€
Model: FF-MOVI-WL
The New Wide Lens is an everyday, go-to wide-angle lens for mobile photographers and filmmakers. Its new glass and wide angle design allows your phone to capture 2x more picture. The most advanced lens we’ve ever made, the New Wide Lens captures smartphone photos and videos that are beautiful, crisp..
133.90€
Ex Tax:109.75€
Model: csslr
Universal camera mount for bigger SLR cameras(like Canon 5D Mark II, sony FS100, redepic and mechanical comp.)
- already assembled The camera can be compensated by tilt servos pitch and roll direction. (2 servos are included) The camera mount is made mainly of carbon fiber parts. Use the CineStar..
960.90€ (From 25.56€ monthly)
Ex Tax:787.62€
Model: gel1
Anti vibration Silicone Gel Pads
The Silicone Gel Pads provide very good shock and vibration protection as well as noise reduction.The back side of the pads is self-adhesive so they can be sticked where it is necessary.Technical specifications:
Low compression set
High temperature resistance -40 t..
1.90€
Ex Tax:1.56€
Model: 360cmproO130
This is an optional upgrade and can bolt on directly to the current Av130200 gimbals. The gimbal is also supplied with an adaptor plate for the MK and Droidworx multi-rotor frames.Landing gear is constructed from 70% carbon Fibre 30% glass fibre. This helps give the carbon fibre some toughness a..
345.90€ (From 11.74€ monthly)
Ex Tax:283.52€