%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Gremsy
Model: GR-JM
The Gremsy Joystick is to control Till and Pan movements by moving the “hat”. This joystick is used for all model: H3, H7, H16, H6, H14.
Qty 1 – Joystick Module
Qty 1 – Bolt Screw M3 x 10
Qty 2 – Bolt Screw M3 x 35
Qty 1 – Joystick holder
Qty 2 – 25mm clamp
Voltage: 5 VDC
Power: 50 mW
Included pu..
76.97€
Ex Tax:76.97€
Brand: Gremsy
Model: gr-can-a3
Gremsy change hub adapter to adapter cable 50 cm.
..
25.33€
Ex Tax:25.33€
Brand: Gremsy
Model: gr-bat
gPower 4S 3400mAh Battery is used to power the Gremsy H7 & H16. Each battery will run the gimbal for 3-8 hours depending on the particular setup. The battery can be charged using the gPower charger included in the Gremsy gimbal package...
48.28€
Ex Tax:48.28€
Brand: Gremsy
Model: S1000-GR
For advanced DJI S1000 owners who want to have Gremsy H7 gimbal attached with antivib, holes are for Gremsy Quick release, which is ot included...
145.00€
Ex Tax:145.00€
Brand: Gremsy
Model: gr-qr
Gremsy Circular Quick Release
This lightweight yet rigid quick release allows to disconnect and connect the gimbal in a matter of seconds. By using the safety button, it can provide additional security to the system. Moreover thanks to hollow and circular design, you can easily put the wires go thro..
148.28€
Ex Tax:148.28€
Brand: Gremsy
Model: gr-can
CanLink features a can bus adapter coupled with a slip ring and in combination with the gStabi controller offers the ability to communicate with a DJI flight controller (Naza, Wookong, A2) via CANBUS to correct horizon drift.
Package includes:
Qty 1 – Slip Ring
Qty 1 – Connector Board_Inside
Qty 1 ..
185.98€
Ex Tax:185.98€
Brand: Gremsy
Model: G16-ECO
This bundle supports to easy install Gremsy H16 EcoFly under M600 or other Drone.Highlight combination:- Damping Plate Pro 2.0- Control gimbal via CANLINK- Quick release- charger + 2 lipos..
2,480.25€
Ex Tax:2,480.25€
Brand: Gremsy
Model: GR-UMP
The T1/T3 - Universal Mounting Plate when used with Hyper Quick Release, Smart Battery gMount, Smart Battery (4S - 3400mAh) to install Gremsy T1/ T3 on carmount, buggy and cablecam....
** Please note you may need to add Hyper Quick Release to switch from your drone to another devices.
**Please note..
65.49€
Ex Tax:65.49€
Brand: Gremsy
Model: GR-FDCC
T1/T3 - Flir Duo Pro R Control Cable is used to connect:
- PWM1 and PWM2 Remote Control
- Power in 12VDC
- Analog Video Output
Specification:
Cable length: 120mm
T1/T3 - Flir Duo Pro R Control Cable Diagram..
29.43€
Ex Tax:29.43€
Brand: Gremsy
Model: gr-la-ge
The Landing gear is used with gStabi H14/H16 gimbal. This is rigid but light weight landing gear set allows you to attach to the H14/H16 at ease while providing unobstructed view from camera with full 360 degree panning.
Qty 8 – Bolt screws M3x8
Qty 1 – Landing Gear
Weight: 254g
Height: 41cm
Diam..
220.41€
Ex Tax:220.41€