Menu
Your Cart

Cables / Connectors

Model: movi-pro-arri
This cable allows users to access ARRI’S Start / Stop command.  This allows users to start and stop camera recording from up to 600+ feet away using the MōVI Controller.  The cable features custom ultra thin and flexible cable.   Features Connector A: LEMO 1B 7 Pin Connector B: Molex Microfit Cust..
235.16€
Ex Tax:235.16€
Model: FF-RED-DT
This cable allows users to power their RED Epic/Weapon/Scarlet from the MōVI Pro’s camera power port.  The cable features a custom thin and flexible cable with high quality connectors.  Users will enjoy the convenience of unlimited up-time with this setup by utilizing the battery hot-swap capabilit..
229.43€
Ex Tax:229.43€
Model: FF-ARRI
Power your ALEXA Mini via D-tap with a high-strand count, silicon-wrapped wire for maximum durability and flexibility. Features Connector A: LEMO 2B 8 Pin Connector B: D-Tap Custom high flex, lightweight cable 250mm (9.8in) cable length..
229.43€
Ex Tax:229.43€
Model: DJI-MA-C-T
Mavic - RC Cable (Type-C connector)..
8.11€
Ex Tax:8.11€
Question
Model: movi pro com
This cable allows users to connect their Spektrum Satellite Receiver to the MōVI Pro. This allows users full control of MōVI Pro pointing using a Spektrum transmitter. Features High flex, lightweight cable Locking GH connector Spektrum connector (for satellite receiver) 3.3v Regulator..
6.48€
Ex Tax:6.48€
Question
Model: MOVI-PRO-FRX
This cable allows users to connect their MōVI Controller Receiver to the MōVI Pro.  This allows users full control of MōVI Pro pointing, FIZ, and RED RCP (Camera Controls) from up to 1000 ft away.  This Cable is included with the MōVI Pro. Features High flex, lightweight cable Locking GH connec..
6.48€
Ex Tax:6.48€
Question
Model: movi-pro-fut
This cable allows users to connect their Spektrum Satellite Receiver to the MōVI Pro. This allows users full control of MōVI Pro pointing using a Spektrum transmitter. Features High flex, lightweight cable Locking GH connector Spektrum connector (for satellite receiver) 3.3v Regulator..
11.39€
Ex Tax:11.39€
Brand: DJI Model: DJI-P4-10P
The DJI Battery (10 PIN-A) to DC Power Cable is used to connect a DJI device with a DC port and the Phantom 4 Intelligent Flight Battery (model PH4-5350mAh-15.2V) as a power supply for the DJI device...
6.48€
Ex Tax:6.48€
Model: movi-pro-dc
This Cable allows users to power their Connex wireless system from one of the accessory ports on the MōVI Pro.  It allows seamless integration and powering of the Connex wireless system onto either the pan bars or tilt cage.   Features High flex, lightweight cable D-Tap Connector Locking GH connec..
27.79€
Ex Tax:27.79€
Model: MAU2-061
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment. REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
7.30€
Ex Tax:7.30€
Model: MAU2-109
This cable connects the P-C current sensor to any Power-Cube.  Inclusive 2 resistors to modify the voltage sense wire to an higher LiPo voltage (60V or 90V) REM: This cable is standard delivery with any Power-Cube !..
5.66€
Ex Tax:5.66€
Brand: Mauch Electronic Model: MAU2-060
Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector. REM: This cable is standard delivery with any Power-Cube !..
5.66€
Ex Tax:5.66€