![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: DJI
Model: DJI-P4-10P
The DJI Battery (10 PIN-A) to DC Power Cable is used to connect a DJI device with a DC port and the Phantom 4 Intelligent Flight Battery (model PH4-5350mAh-15.2V) as a power supply for the DJI device...
7.90€
Ex Tax:6.48€
Model: movi-pro-dc
This Cable allows users to power their Connex wireless system from one of the accessory ports on the MÅVI Pro. It allows seamless integration and powering of the Connex wireless system onto either the pan bars or tilt cage.
Features
High flex, lightweight cable
D-Tap Connector
Locking GH connec..
33.90€
Ex Tax:27.79€
Model: MAU2-061
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup.
The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment.
REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
8.90€
Ex Tax:7.30€
Model: MAU2-109
This cable connects the P-C current sensor to any Power-Cube.
Inclusive 2 resistors to modify the voltage sense wire to an higher LiPo voltage (60V or 90V)
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-060
Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm
To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector.
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Model: alexamp2
Silicon Soft Power cable for Alexa Mini - lenght 1m.
Original connector is D-tap, but we can install some other connector too...
108.90€
Ex Tax:89.26€
Brand: Mauch Electronic
Model: MAU2-062
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-063
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Ex Tax:4.84€
Model: camgopro
CR-Camera Interface Cable for GoPro cameras CAMremote PRO 2
CR-Camera Interface Cable for GoPro, GoPro2 and GoPro3 cameras (GoPro BUS plug, length 30cm/12" - 8g). Controls movie recording, shutter release and camera on/off features of the camera. Composite video is available both in movie and photo ..
43.90€
Ex Tax:35.98€
Model: bat2dtap
Ultra lightweight and flexible silicone cable to adapt a Freefly Aux battery pack to a female d-tap connector. Useful for powering any accessories that utilize a D-tap connector.
This cable will pass full unregulated voltage to whatever device it is plugged into. Make sure the Freefly Aux Battery ..
35.90€
Ex Tax:29.43€
Model: bat2lemo
Ultra-lightweight and flexible silicone cable to adapt a Freefly Aux Battery pack to a 2 pin lemo connector. Useful for powering a variety of accessories like follow focus, wireless, etc.
This cable will pass full unregulated voltage to whatever device it is plugged into. Make sure the Freefly A..
69.90€
Ex Tax:57.30€