![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: BetaFPV
Model: 01120009
This BetaFPV key will allow you to repair your ELRS receiver following a brick of the latter due to improper handling.
It supports multiple computer systems such as Windows, MAC and Linux and uses a USB-C port to connect the computer.
..
8.93€
Ex Tax:8.93€
Brand: BetaFPV
Model: 00313631
Set of 6 Female Power Cable dedicated to the new BETAFPV BT2.0 1S 30C 300mah battery.
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with..
8.11€
Ex Tax:8.11€
Brand: BetaFPV
Model: 00313640
Set of 10 connectors male/female dedicated to the new BETAFPV BT2.0 1S 30C 300mah battery.
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. B..
8.11€
Ex Tax:8.11€
Brand: BetaFPV
Model: 00313571
This power cable with XT30 connector is specially made for 4S whoop drone, soldering with the capacitor specification with 25V/220μF/20%, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage, Its supportive power is up to 4S, fits for F4 V2 4S FC and F4 2-4S..
2.38€
Ex Tax:2.38€
Brand: BetaFPV
Model: 01120002_1
This new 6 port 1S battery charger supports PH2.0 and BT2.0 at the same time. In addition, charging is faster when using a 30W adapter. Compact, fast-charging and portable, choosing a 1S battery charger that best suits your needs won"t be difficult with this 6-port 1S charger and adapter.
Note: DO ..
26.97€
Ex Tax:26.97€
Brand: BetaFPV
Model: 00313892
Specifications
Plugs: BT2.0
Connector: Type-C
LCD: White
Weight: 12.37g
Dimensions: 52.7*23.2*14.2mm..
10.57€
Ex Tax:10.57€
Brand: BetaFPV
Model: 00313630
The BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.
Sold by piece.
Now Betafpv exclusive designed BT2.0 connector 1S battery has finally come out, which has broken..
4.84€
Ex Tax:4.84€
Brand: BetaFPV
Model: 00313665
The BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.
Sold by unit.
Bullet Point
Decreased internal resistance
Better performance
More efficient discharge
Longer f..
6.48€
Ex Tax:6.48€
Brand: BetaFPV
Model: 01070002_3
The BETAFPV Nano RF TX module is based on the ExpressLRS project, an open source RC link for RC applications. ExpressLRS aims for the best possible link performance in terms of speed, latency or even range.
Diagram
Note: Assemble the antenna before power on, otherwise the PA chip of the nano TX mo..
44.18€
Ex Tax:44.18€
Brand: BetaFPV
Model: 01170001-2
The T dipole antenna is designed and manufactured by BETAFPV for a 868MHz receiver. This antenna is omnidirectional. Compatible with any receiver with an IPEX MHF connector.
..
7.30€
Ex Tax:7.30€
Brand: BetaFPV
Model: 01170001-1
The T dipole antenna is designed and manufactured by BETAFPV for a 2.4G receiver. This antenna is omnidirectional. Compatible with any receiver with an IPEX MHF connector.
..
8.93€
Ex Tax:8.93€
Brand: BetaFPV
Model: 01120008_3
These hall gimbals are intended for LiteRadio 3 and 2SE, very easy to replace. Their longevity and good performance make them a very interesting value for money.
You should know that if you are driving :
In mode 1, the Throttle/Yaw stick will be on the right of the radio, the Pitch/Roll on the left...
14.67€
Ex Tax:14.67€