Mini OSD On-Screen-Display for RC Multicopter (Naze32/SP-F3 compatible)

  • OneDrone
  • OD-naze-OSD
  • 15
  • 8
  • 14.91€

  • Ex Tax: 12.22€
- OR -


- Onboard 5V and 12V switching power supplies.

- Direct connections to naze when stacked.

- Cam and vtx 3pin headers with selectable 12v or 5v power from onboard regs.

- Can power naze and anything else attached to naze, so you can disconnect the red power wire from all escs.

- Onboard micro-USB plug for flashing/configuring your favourite OSD software. Anything that works on MinimOSD will also work on this.

- Voltage dividers for both battery sources (main batt/video batt voltage sensors).

- Series protection resistors for RSSI and current sensor connections. RSSI can be filtered from high-frequency PWM into an analogue signal by enabling the RSSI filter solderjumper.

- Extremely bright, blinding LEDs.


- With straight pin and side pin, please solder by yourself

- For Naze 32/SP3

- Size: 16*16mm

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products