![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Flywoo
Model: FW19002409
Customise your quad to your liking with these LED strips included a 3.3V BEC.
Available in blue, pink, green, red and white.
Note : If the BEC input is a 6S battery, a 6S voltage capacitor needs to be added.
..
16.90€
Ex Tax:13.85€
Model: BEC-GOGGLES-G2V2
This SpeedyBee BEC is intended to power your DJI Goggles 2 and/or your DJI V2 goggles.
In addition to supporting DJI Goggles, the SpeedyBee Goggles BEC is also compatible with goggles having the same port (9.2V output).
..
20.90€
Ex Tax:17.13€
Out of stock
Model: 010-0154-00
The Castle Creations CC BEC 2.0 is the power solution for cinelifters video system.
The latter will give you higher voltage ranges.
This voltage regulator is perfect for powering servos, cameras and other power-hungry accessories.
The CC BEC 2.0 is the solution to protect your electronic components ..
61.90€
Ex Tax:50.74€
Model: FLEX25-LED
Customize your SpeedyBee Flex25 to your liking with these LED strips with built-in 12V 1A BEC.
Available in white, green or blue.
Incl..
9.90€
Ex Tax:8.11€
Brand: Mauch Electronic
Model: MAU2-082
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
26.90€
Ex Tax:22.05€
Model: HM-SB
HiModel 6-50V Input 20A Large Current Switching Mode Voltage Regulator/ SBEC
HiModel 20A SBECInput: 6 - 50.4 VOutput voltage: 7.4V 8.4V 9V 12V OUTPUT (jumper selection)Current: 20amps continuous/ 25amps peak (2 seconds)Mode: Switch-modeQuiescent current: 60uA to 200uASize: 45 x 26 x 8mmWeight: 30g..
36.90€
Ex Tax:30.25€
Out of stock
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
14.90€
Ex Tax:12.21€
Brand: Gremsy
Model: GR-P-UBEC
A switching power supply that has dual outputs (12V-5A) and accept wide input range from 14V to 52V, comes in a small and lightweight module. This UBEC should be used with the PIXY where power for Flir Duo Pro R via the AUX 8-pin cable on the tilt cage. ..
81.90€
Ex Tax:67.13€
Out of stock
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
36.90€
Ex Tax:30.25€
Brand: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
229.90€
Ex Tax:188.44€
Brand: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
179.90€
Ex Tax:147.46€
Out of stock
Brand: Gremsy
Model: GR-S1-UBEC
A switching power supply that has dual outputs (12V-5A, 5V-1A) and accept wide input range from 14V to 52V, comes in a small and lightweight module. This UBEC should be used with the S1 where power for camera and accessories is needed on the tilt stage of the gimbal. Connect output of the UBEC to th..
79.90€
Ex Tax:65.49€