Menu
Your Cart

iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)

iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
New
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
iFlight Nazgul Evoque F5X HD 6s - BNF (crsf)
  • The Nazgul Evoque F5X HD features the latest and greatest in electronics Iflight has to offer, fully protected and illuminated. This BNF has the Caddx Vista HD system with the DJI camera and an integrated Iflight M8Q-5883 V2.0 GPS.

    IFLIGHT NAZGUL EVOQUE F5X HD 6S  - BNF

    CHARACTERISTICS

    • Overall dimensions: 136*190mm (body dimensions)
    • Geometry: Squashed-X frame
    • Distance from bottom to top: 28 mm
    • Arm Thickness: 6mm
    • Bottom plate thickness: 3 mm
    • Top plate thickness: 3 mm
    • Upper plate thickness (average): 3 mm
    • XING2 2207 1855KV Motors
    • Nazgul F5 Propellers
    • Weight: 412g (without battery or GoPro mount)
    • GPS: Iflight M8Q-5883 V2.0


    FC // BLITZ MINI F7 

    • MCU:STM32 F722
    • Gyro:MPU6000
    • Baro: NO
    • Betaflight OSD:IFLIGHT OSD(AT7456E)
    • Blackbox:16MB
    • 5 X Uarts
    • UART1 for VTX HD/Analog
    • UART2 for Receiver
    • UART3、UART4 for GPS or 0ther sensors that require a serial port
    • UART6 for ESC Telemetry
    • 4×Dshot/PWMoutputs 
    • 1×I2C    
    • 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI)
    • 1xSH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)
    • 1xSH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2)
    • 1xSH1.0 4Pin GPS connector (T4/R4/G/5V)
    • 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)

    ESC // BLITZ MINI 55A

    • Size: 35*42mm
    • Mounting Holes: 20*20mm/Φ4mm
    • Weight: 11.3g
    • Supports 2-6S lipo input
    • MCU:G071
    • Constant: 55 Amps 
    • Burst: 60 Amps
    • Current sensor: Yes
    • BEC: No
    • Current rate: 100
    • Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
    • Firmware: BLHeli 32
    • Target: IFLIGHT_BLITZ_G1

    INCLUDED

    • 1x Nazgul Evoque F5X
    • 4x Nazgul F5 Prop
    • 2x Lipo Pad Set
    • 4x Battery Straps

Write a review

Note: HTML is not translated!
Bad Good
599.90€
Ex Tax: 491.72€
  • Stock: In Stock
  • Model: DFR-F011579-GPS
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.