Accessories

Accessories
Sunnylife Thickened Remote Controller Silicone Cover Protective Case for DJI Phantom 4PRO+

Sunnylife Thickened Remote Con...

Brand Name:SUNNYLIFEDrones Accessories Type:Prop ProtectorWeight:100gPackage:YesModel Number:P4-BHT9..

9.89€ Ex Tax: 8.11€

Sunnylife Remote Controller Antenna Signal Booster Range Extender Specular Aluminum Sheet For DJI SPARK & MAVIC PRO & MAVIC AIR

Sunnylife Remote Controller An...

Brand Name: SUNNYLIFEPackage: YesSize: 0Compatible Drone Brand: DJIModel Number: MV-ZC601Weight: 60G..

9.89€ Ex Tax: 8.11€

MinimOSD for Pixhawk, Ardupilot

MinimOSD for Pixhawk, Ardupilo...

MinimOSD, a minimal Arduino-based on-screen display board. It's tailored for use with ArduPilot M..

19.90€ Ex Tax: 16.31€

Pixhawk Digital Airspeed Sensor Kit

Pixhawk Digital Airspeed Senso...

The Pixhawk digital differential airspeed sensor has a very low offset, a high resolution and..

64.90€ Ex Tax: 53.20€

Mauch Sensor Hub X8 (8 inputs)

Mauch Sensor Hub X8 (8 inputs)...

The Sensor Hub X8, is able to collect the current of up to 8 current sensors and pass the sumarized ..

149.90€ Ex Tax: 122.87€

Mauch Standard Line Customized cable from Sensor Hub X2 to HS-xxx-xx Sensor Board

Mauch Standard Line Customized...

The cable is made of AWG28 silicone wires with original Hirose DF13 connectors. The total cable leng..

4.90€ Ex Tax: 4.02€

Mauch Standard Line Customized cable from HS-xxx-xx Sensor Board to Pixhawk / APM

Mauch Standard Line Customized...

The cable is made of AWG28 silicone wires with original Hirose DF13 connectors. The total cable leng..

5.90€ Ex Tax: 4.84€

Mauch Standard Line Adapter cable for Pixracer (JST GH 1.25mm)

Mauch Standard Line Adapter ca...

The cable is made of AWG28 silicone wires with original Hirose DF13 and JST GH connectors.  The..

5.90€ Ex Tax: 4.84€

Mauch Standard Line 4-14S Backup BEC for Pixhawk 2

Mauch Standard Line 4-14S Back...

This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. ..

39.90€ Ex Tax: 32.71€

Mauch Standard Line 4-14S HYB-BEC / 5.30V DF-13-4P

Mauch Standard Line 4-14S HYB-...

This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. ..

35.90€ Ex Tax: 29.43€

Mauch Standard Line 2-6S Backup BEC for Pixhawk 2

Mauch Standard Line 2-6S Backu...

Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A outpu..

23.90€ Ex Tax: 19.59€

Mauch Standard Line 2-6S BEC / 5.35V / DF-13-4P

Mauch Standard Line 2-6S BEC /...

Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A outpu..

19.90€ Ex Tax: 16.31€

Mauch Standard Line Enclosure for Sensor Hub X2

Mauch Standard Line Enclosure ...

3D printed enclosure for the Sensor Hub X2 The enclosure should be installed with double side tape ..

7.90€ Ex Tax: 6.48€

Mauch Standard Line Sensor Hub X2

Mauch Standard Line Sensor Hub...

This sensor hub is to connect two Standard Line (HS) current sensors in parallel. The current of b..

29.90€ Ex Tax: 24.51€

Mauch Standard Line 200A 4-14S Sensor (HS-200-HV)

Mauch Standard Line 200A 4-14S...

200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.  The voltage r..

34.90€ Ex Tax: 28.61€

Showing 1 to 15 of 89 (6 Pages)