FeiyuTech G4Plus 3-Axis Handheld Gimbal (Quick Detach)

  • Feiyu Tech
  • FY-G4QD
  • 330
  • 10
  • 329.90€
  • 179.90€

  • Ex Tax: 147.46€
- OR -

Product Highlights

  • 3-Axis Motorized Gimbal
  • For GoPros & Cameras 1.3 to 1.8" Tall
  • Fixed Axes and Pan/Tilt Following Modes
  • 320° Pan/Tilt Rotation
  • 100° Roll Rotation
  • Single-Button Operation
  • Battery Level Indicator Light
  • Accommodates LCD Touch BacPac
  • Optional Gimbal Remote Control
  • Four Batteries and Charger Included

The Feiyu G4 QD 3-Axis Handheld Gimbal allows you to capture stabilized, free-floating shots with your GoPro or similarly sized action cameras that are between 1.3 and 1.8" tall. It is held and operated using a single hand and features four different operating modes for increased creative possibilities. You can choose to lock the camera in place along all three axes (pan, tilt, and roll), or select modes where the camera will smoothly follow as you pan and tilt the handle. Switching between modes is done using a single LED push-button on the handle, which flashes to indicate the mode selected.

The G4 QD is designed for one-handed operation and features a design that hides all wires, resulting is a cleaner and sleeker look. The back of the camera mount maintains open access to the camera's power and video ports and lets you view the built-in LCD on cameras such as the GoPro HERO4 Silver, or GoPro camera equipped with a LCD Touch BacPac. The G4 is powered using two rechargeable 900mAh batteries, which slot into the handle. A battery indicator light on the device lets you know when it's time to recharge the batteries using the included charger.

Key Features
  • Accommodates action cameras as thick as a GoPro with a Touch LCD BacPac attached and a height of 1.3 to 1.8"
  • Five modes with single button operation
  • LED battery level indicator light
  • Maintains access to power and video output ports
  • Handle threaded to accept optional extension pole
  • Accommodate a GoPro with an attached Touch LCD BacPac
  • Four batteries and charger included
  • Optional Gimbal Remote Control
Pan Following Mode: Locks tilt and roll axes. Camera smoothly pans to follow the direction of the handle
Tilt and Pan Following Mode: Locks roll axis. Camera smoothly follows the pan and tilt motion of the handle
All Axis Lock Mode: Locks the pan, tilt, and roll axes of the camera in the position it is in when mode is activated
Inverted Mode: Allows you to turn the gimbal upside-down. This mode is an inverted version of the Pan Following Mode
Standby Mode: The gimbal remains on but the motor is shut down
Rotation Angles
Pan: 320°
Tilt: 320°
Roll: 100°


Compatibility GoPro and similar cameras 1.3 to 1.8" (33 to 46 mm) in height
Pan Angle -160° (left) to +160° (right) (held vertically)
-50° (left) to +50° (right) (held horizontally)
Tilt Angle
-160° to +160° (held vertically)
Roll Angle
-50° to +50°
Panning Following Rate
3°/s to 150°/s
Tilt Following Rate
2°/s to 75°/s
Motion Attitude Tracking Accuracy
Minimum: 0.1°
Standard: 0.2°
Maximum: 0.5°

(Motor overload <2G) Static Attitude Tracking Accuracy Minimum: 0.01°
Standard: 0.02°
Maximum: 0.05°

(Gimbal in static mode) Start-Up Time 2.5 seconds Battery Type 2 x 18350 type, 900 mAh batteries Voltage 8.4 VDC (6 to 17 VDC) Overload Current Protection 800 mA Dimensions 9.4 x 3.0 x 2.6" (23.9 x 7.5 x 6.5 cm) Weight 10.2 oz (290 g) (without camera or batteries)

Box Content

  • 4 x 900mAh 18350-Type Batteries
  • Charger
  • Limited 1-Year Warranty
  • Write a review

    Note: HTML is not translated!
        Bad           Good